{"title":"All products","description":null,"products":[{"product_id":"low-profile-projector-ceiling-mount-prb-717-black-prb-717-blk","title":"QualGear Low Profile Universal Projector Ceiling Mount, Black, PRB-717-BLK","description":"\u003cp\u003eMount a projector tight to the ceiling and keep the room's sightlines clean. The QualGear PRB-717-BLK low profile universal projector ceiling mount holds projectors up to 30 lb \/ 13.6 kg just 6 in \/ 15.2 cm from the ceiling, and fits units with mounting holes 6.6-16 in \/ 16.8-40.6 cm apart.\u003c\/p\u003e\u003cp\u003eAim the image with 0-60 degree tilt, 360 degree swivel, +\/-30 degree pitch, and +\/-20 degree roll, then fine-tune lens position with 1 in \/ 2.5 cm of horizontal shift. The snap-on, snap-off design releases the projector from the mount when you need quick access.\u003c\/p\u003e\u003cp\u003eCold-rolled steel construction carries the load in a black finish. Pairs with a QualGear HDMI cable and VT2-B-50-P reusable cable ties for a clean ceiling run; when the install calls for a telescopic column, step up to the QualGear Universal Telescopic Projector Ceiling Mount, Black (QG-PM-002-BLK). Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":34140128710,"sku":"PRB-717-BLK","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/853770005221.jpg?v=1738614917"},{"product_id":"low-profile-projector-ceiling-mount-prb-717-white-prb-717-wht","title":"QualGear Low Profile Universal Projector Ceiling Mount, White, PRB-717-WHT","description":"\u003cp\u003eKeep the projector tight to a white ceiling and out of the room's sightline. The QualGear PRB-717-WHT low profile universal projector ceiling mount holds projectors up to 30 lb \/ 13.6 kg just 6 in \/ 15.2 cm from the ceiling and fits units with mounting holes spaced 6.6-16 in \/ 16.8-40.6 cm apart.\u003c\/p\u003e\u003cp\u003eAim the image with 0-60 degree tilt and 360 degree swivel, level it with +\/-30 degree pitch and +\/-20 degree roll, and finish alignment with 1 in \/ 2.5 cm of horizontal shift. The snap-on, snap-off design releases the projector from the mount for quick access.\u003c\/p\u003e\u003cp\u003eCold-rolled steel construction in white sits quietly against a white ceiling. Pairs with a QualGear HDMI cable and VT2-B-50-P reusable cable ties for a clean ceiling run; when the install calls for a telescopic column, step up to the QualGear Universal Telescopic Projector Ceiling Mount, White (QG-PM-002-WHT). Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461992390,"sku":"PRB-717-WHT","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/prb-717-wht-1.jpg?v=1784963592"},{"product_id":"apple-tv-mount-2nd-3rd-gen-black-qg-am-017","title":"QualGear Mount for Apple TV\/AirPort Express Base Station (for 2nd \u0026 3rd Generation Apple TVs), QG-AM-017","description":"\u003cp\u003eA black plastic mount that holds a 2nd or 3rd generation Apple TV or an AirPort Express Base Station. Attach it to a TV wall mount, or fasten it to a wall or ceiling, and the media area stays tidy with the device off the shelf.\u003c\/p\u003e\u003cp\u003eThe included hardware covers most TV wall mounts as well as wooden studs, concrete, and brick, so one pack handles whichever surface the install calls for. Installation is rated easy. In the box: the Apple TV mount and the pre-sorted hardware pack.\u003c\/p\u003e\u003cp\u003ePairs with the QualGear High Speed HDMI 2.0 cable (4K, 18 Gbps) to finish the connection to the display. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461993606,"sku":"QG-AM-017","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/1.jpg?v=1738614914"},{"product_id":"apple-tv-mount-2nd-3rd-gen-white-qg-am-017-w","title":"QualGear Mount for Apple TV\/AirPort Express Base Station (for 2nd \u0026 3rd Generation Apple TVs), QG-AM-017-W","description":"\u003cp\u003eA white plastic mount for the 2nd or 3rd generation Apple TV and the AirPort Express Base Station. It attaches to a TV wall mount or fastens to a wall or ceiling, taking the device off the shelf — and the white finish sits quietly against painted surfaces.\u003c\/p\u003e\u003cp\u003eThe pre-sorted hardware pack fits most TV wall mounts and fastens into wooden studs, concrete, and brick, so the mount goes onto whichever surface the room offers. Installation is rated easy. In the box: the Apple TV mount and the pre-sorted hardware pack.\u003c\/p\u003e\u003cp\u003ePairs with the QualGear High Speed HDMI 2.0 cable (4K, 18 Gbps) to complete the connection to the display. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461994374,"sku":"QG-AM-017-W","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-am-017-w-1.jpg?v=1784959593"},{"product_id":"single-monitor-desk-mount-13-32-in-silver-qg-dm-01-016","title":"QualGear 3-Way Articulating Single Monitor Desk Mount, 13-32 In, Silver, QG-DM-01-016","description":"\u003cp\u003eA 3-way articulating arm that lifts a single monitor off the desk and holds it at working height. It fits VESA 75x75 or 100x100 mm monitors within its 17.6 lb \/ 8 kg rating — the 13-32 in \/ 33-81 cm screen range is a guide, not the limit — on a die-cast aluminum arm in silver.\u003c\/p\u003e\u003cp\u003eThe ball joint tilts 15 deg in any direction, the arm swivels 90 deg left or right, and the telescopic column sets height without tools, so glare and neck angle get fixed at the desk. The base installs as a desk clamp or through a grommet, and integrated cable management keeps the cords gathered. In the box: the mount, a pre-sorted hardware pack, and an installation manual.\u003c\/p\u003e\u003cp\u003eStep up to the QG-DM-01-023 spring-arm mount for counterbalanced fingertip movement, or to the QG-DM-02-016 dual mount for a second screen; it also pairs with the QualGear Smart Standing Desk and Star Ergonomics sit-stand frames. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461995526,"sku":"QG-DM-01-016","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/B00ZOO3WYS_MAIN_jpg.jpg?v=1738614910"},{"product_id":"spring-arm-monitor-desk-mount-13-32-in-silver-qg-dm-01-023","title":"QualGear Articulating Monitor Desk Mount with Spring Arm, 13-32 In, Silver, QG-DM-01-023","description":"\u003cp\u003eA counterbalanced spring-arm desk mount that floats a single monitor and moves with a fingertip. It fits VESA 75x75 to 100x100 mm monitors within its 19.8 lb \/ 9 kg rating — the 13-32 in \/ 33-81 cm screen range is a guide, not the limit — with solid steel and die-cast aluminum construction in silver.\u003c\/p\u003e\u003cp\u003eSet the built-in tension gauge to the monitor's weight and the arm holds position wherever it is placed: tilt spans -40 to +90 deg at a fingertip, and the head rotates 360 deg from landscape to portrait. The base installs as a desk clamp or through a grommet, and integrated cable management keeps cords in check. In the box: the spring-arm mount, a pre-sorted hardware pack, and a color installation manual.\u003c\/p\u003e\u003cp\u003eStep up to the QG-DM-02-016 or QG-DM-02-022 dual mounts to add a second screen, or pair it with the QualGear Smart Standing Desk for a sit-stand workstation. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461996550,"sku":"QG-DM-01-023","price":104.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/B00ZOO3WXY.MAIN.jpg?v=1738614908"},{"product_id":"dual-monitor-desk-mount-13-32-in-silver-qg-dm-02-016","title":"QualGear 3-Way Articulating Dual Monitor Desk Mount, 13-32 In, Silver, QG-DM-02-016","description":"\u003cp\u003eA 3-way articulating desk mount that puts two monitors at working height on a single clamp or grommet base. Each die-cast aluminum arm fits VESA 75x75 to 100x100 mm monitors within its 17.6 lb \/ 8 kg rating — the 13-32 in \/ 33-81 cm per-monitor range is a guide, not the limit.\u003c\/p\u003e\u003cp\u003eEach arm rotates 360 deg for landscape or portrait, tilts 15 deg in any direction on a ball joint, and swivels 90 deg left or right, while the telescopic column sets both screens' height without tools. In the box: the dual mount, a pre-sorted hardware pack, cable clips, and an installation manual.\u003c\/p\u003e\u003cp\u003ePairs with the QualGear Smart Standing Desk or a Star Ergonomics sit-stand frame to finish a dual-screen workstation. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461997446,"sku":"QG-DM-02-016","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/B00KMXW404.MAIN.jpg?v=1738614907"},{"product_id":"dual-monitor-desk-mount-13-32-in-black-qg-dm-02-022","title":"QualGear 3-Way Articulating Dual Monitor Desk Mount, 13-32 In, Black, QG-DM-02-022","description":"\u003cp\u003eA 3-way articulating desk mount in black that carries two monitors on steel arms above a single clamp or grommet base. Each arm fits VESA 75x75 or 100x100 mm monitors within its 17.6 lb \/ 8 kg rating — the 13-32 in \/ 33-81 cm per-monitor range is a guide, not the limit.\u003c\/p\u003e\u003cp\u003eEach arm swivels 90 deg left or right, and height adjusts along the center pole until both screens sit at eye level. Cable management is built in, and the mount installs with either the desk clamp or a grommet base.\u003c\/p\u003e\u003cp\u003ePairs with the QualGear Smart Standing Desk or a Star Ergonomics sit-stand frame for a full dual-screen workstation. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461998406,"sku":"QG-DM-02-022","price":68.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/B00ZOO3X8I.MAIN.jpg?v=1738614905"},{"product_id":"telescopic-projector-ceiling-mount-black-qg-pm-002-blk","title":"QualGear Universal Telescopic Projector Ceiling Mount, Black, QG-PM-002-BLK","description":"\u003cp\u003eFit one mount to two very different rooms. The QualGear QG-PM-002-BLK universal projector ceiling mount is a 2-in-1 design that installs flush at 4.7 in \/ 12 cm or telescopic from 16.9-25.6 in \/ 43-65 cm, supporting projectors up to 44 lb \/ 20 kg.\u003c\/p\u003e\u003cp\u003eSetup takes three steps: mount the ceiling plate, attach the projector bracket, and hang the assembly. It is designed for regular ceilings — drywall or wooden beams — and does not support vaulted ceilings or walls; classrooms and home theaters are its natural rooms.\u003c\/p\u003e\u003cp\u003ePairs with a QualGear HDMI cable and VT2-B-50-P reusable cable ties for a clean ceiling run; for a complete installation package, step up to the QualGear Projector Mount Kit, Black (QG-KIT-CA-3IN-B). Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461998598,"sku":"QG-PM-002-BLK","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/31QfkLeTiaL.jpeg?v=1738614903"},{"product_id":"projector-ceiling-mount-extension-column-black-qg-pm-002-blk-l","title":"QualGear Projector Ceiling Mount with Adjustable Extension Column, Black, QG-PM-002-BLK-L","description":"\u003cp\u003eDrop a projector to the right height in a room where flush mounting will not work. The QualGear QG-PM-002-BLK-L is a universal projector ceiling mount whose telescopic extension column adjusts from 21.45-35.43 in \/ 545-900 mm, rated for projectors up to 29.7 lb \/ 13.5 kg.\u003c\/p\u003e\u003cp\u003eUse it where the projector needs to hang well below the ceiling line, for office and home theater projection. In the box: the projector ceiling mount with its adjustable extension column.\u003c\/p\u003e\u003cp\u003eIt installs on regular wooden or concrete ceilings and supports sloped and vaulted ceilings as well — rooms that rule out a flush mount. Pairs with a QualGear HDMI cable for the video run from source to projector. Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21461999942,"sku":"QG-PM-002-BLK-L","price":53.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pm-002-blk-l-1.jpg?v=1784963992"},{"product_id":"low-profile-projector-ceiling-mount-short-black-qg-pm-002-blk-s","title":"QualGear Low Profile Projector Ceiling Mount, Short, Black, QG-PM-002-BLK-S","description":"\u003cp\u003ePut a projector on a sloped ceiling without hunting for a special bracket. The QualGear QG-PM-002-BLK-S is a low profile projector ceiling mount that fits both regular and sloped (vaulted) ceilings, holding projectors up to 29.7 lb \/ 13.5 kg flush at a 6 in \/ 15.2 cm ceiling distance.\u003c\/p\u003e\u003cp\u003eIt mounts to wooden or concrete ceilings and suits smaller home theaters and classrooms. The included extension arms extend up to 15.7 in \/ 400 mm to reach wider mounting-hole patterns.\u003c\/p\u003e\u003cp\u003ePairs with a QualGear HDMI cable and VT2-B-50-P reusable cable ties for a clean ceiling run; when the room calls for a telescopic drop, step up to the QualGear Universal Telescopic Projector Ceiling Mount, Black (QG-PM-002-BLK). Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462001990,"sku":"QG-PM-002-BLK-S","price":26.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pm-002-blk-s-1.jpg?v=1784964141"},{"product_id":"telescopic-projector-ceiling-mount-white-qg-pm-002-wht","title":"QualGear Universal Telescopic Projector Ceiling Mount, White, QG-PM-002-WHT","description":"\u003cp\u003eOne mount covers both the flush install and the long drop. The QualGear QG-PM-002-WHT universal projector ceiling mount installs flush at 4.7 in \/ 12 cm or telescopic from 16.9-25.6 in \/ 43-65 cm, and supports projectors up to 44 lb \/ 20 kg.\u003c\/p\u003e\u003cp\u003eInstallation runs in three steps — mount the ceiling plate, attach the projector bracket, hang the assembly — on regular ceilings with drywall or wooden beams. It does not support vaulted ceilings or walls, and the white finish suits classrooms and home theaters alike.\u003c\/p\u003e\u003cp\u003ePairs with a QualGear HDMI cable and VT2-B-50-P reusable cable ties for a tidy ceiling run; for a complete installation package, step up to the QualGear Projector Mount Kit, White (QG-KIT-CA-3IN-W). Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462003270,"sku":"QG-PM-002-WHT","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pm-002-wht-1.jpg?v=1784964291"},{"product_id":"low-profile-projector-ceiling-mount-short-white-qg-pm-002-wht-s","title":"QualGear Low Profile Projector Ceiling Mount, Short, White, QG-PM-002-WHT-S","description":"\u003cp\u003eKeep the projector tight to the ceiling and out of the room's sightline. This short, white low profile projector ceiling mount holds projectors up to 29.7 lb \/ 13.5 kg at about 6 in \/ 15.2 cm from the ceiling, and installs on regular or sloped (vaulted) ceilings in wood or concrete.\u003c\/p\u003e\u003cp\u003eThe included extension arms extend up to 15.7 in \/ 400 mm to reach wider mounting-hole patterns, and the head aims the image after installation: 360-degree rotation, 0-90 degree vertical tilt, and -15 to +15 degree fine adjustment on both tilt and swivel. Built-in cable management keeps the ceiling run tidy in a small home theater or classroom.\u003c\/p\u003e\u003cp\u003eIf a flush profile is not what the room needs, the QG-PM-002-WHT universal telescopic mount is the step up in the same family. Pairs with a QualGear high speed HDMI cable and reusable cable ties for a clean ceiling run. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462005190,"sku":"QG-PM-002-WHT-S","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pm-002-wht-s-1.jpg?v=1784964466"},{"product_id":"projector-wall-mount-fine-tune-white-qg-pm-ft1-wht","title":"QualGear Projector Wall Mount with Fine Tune Adjustments, White, QG-PM-FT1-WHT","description":"\u003cp\u003eMount the projector on the wall — where a ceiling install is not practical — and still get a squared image. This projector wall mount carries projectors up to 33 lb \/ 15 kg on a telescopic arm that reaches 14.17-26.18 in \/ 360-665 mm from the wall, for regular front throw and short throw projectors.\u003c\/p\u003e\u003cp\u003eThree tool-less dials fine-tune vertical tilt, horizontal swivel, and horizontal rotation, +\/-5 degrees each, so alignment happens at the mount after the hardware is up. The head also shifts left\/right up to 3.54 in \/ 90 mm and up\/down 1.57 in \/ 40 mm to land the image without remounting. It suits most DLP and LCD projectors.\u003c\/p\u003e\u003cp\u003eSix axes of adjustment in a stable wall-mounted position set this mount apart, and the white finish blends with most walls. Pairs with a QualGear high speed HDMI cable and reusable cable ties for a clean wall run. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462007750,"sku":"QG-PM-FT1-WHT","price":234.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pm-ft1-wht-1.jpg?v=1784964616"},{"product_id":"pro-av-projector-bracket-black-qg-pro-pm-50-b","title":"QualGear Pro-AV Projector Bracket, Black, QG-PRO-PM-50-B","description":"\u003cp\u003eSpec first: 70 lb \/ 31.8 kg rated load, standard 1.5-in NPT interface, and a 3.46 in \/ 88 mm ceiling-to-projector profile. This two-piece Pro-AV projector bracket threads onto standard 1.5-in NPT pipe and anchors installs in boardrooms, classrooms, entertainment venues, and home theaters.\u003c\/p\u003e\u003cp\u003eTwelve adjustment points — six for tilt, six for swivel — hold the aim after setup, so the picture stays where the installer left it. Tilt adjusts +\/-20 degrees, swivel +\/-8 degrees, and rotation spans -180 to +180 degrees. A quick-release feature speeds projector attachment and removal, and the pre-assembled mounting interface with pre-sorted hardware pack shortens the install.\u003c\/p\u003e\u003cp\u003eAluminum and high-grade cold rolled steel carry a scratch-resistant epoxy powder coat in black. Complete the drop with a QualGear 1.5-in NPT extension pipe and the ceiling adapter for your surface — or step up to the complete QualGear projector mount kit in black (QG-KIT-CA series). Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462009222,"sku":"QG-PRO-PM-50-B","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-50-B.MAIN.jpg?v=1738614889"},{"product_id":"pro-av-projector-bracket-white-qg-pro-pm-50-w","title":"QualGear Pro-AV Projector Bracket, White, QG-PRO-PM-50-W","description":"\u003cp\u003eThe numbers an installer checks first: 70 lb \/ 31.8 kg rated load, standard 1.5-in NPT interface, 3.46 in \/ 88 mm ceiling-to-projector profile. This two-piece Pro-AV projector bracket in white threads onto standard 1.5-in NPT pipe for boardrooms, classrooms, entertainment venues, and home theaters.\u003c\/p\u003e\u003cp\u003eTwelve adjustment points — six for tilt, six for swivel — hold the aim after setup, so the picture stays where it was dialed in. Tilt adjusts +\/-20 degrees, swivel +\/-8 degrees, and rotation spans -180 to +180 degrees. A quick-release feature speeds projector attachment and removal, and the pre-assembled mounting interface with pre-sorted hardware pack shortens the install.\u003c\/p\u003e\u003cp\u003eAluminum and high-grade cold rolled steel carry a scratch-resistant epoxy powder coat in white. Complete the drop with a QualGear 1.5-in NPT extension pipe and a flat, drop, or sloped ceiling adapter for your surface — or step up to the complete QualGear projector mount kit in white (QG-KIT-CA series). Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462011526,"sku":"QG-PRO-PM-50-W","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-50-W.MAIN.jpg?v=1738614887"},{"product_id":"pro-av-flat-ceiling-adapter-black-qg-pro-pm-ca-b","title":"QualGear Pro-AV Flat Ceiling Adapter, Black, QG-PRO-PM-CA-B","description":"\u003cp\u003eEvery pipe drop starts at the structure. This flat ceiling adapter anchors a Pro-AV projector drop to a single wood joist, structural wood, or structural concrete, accepts all standard 1.5-in NPT threaded pipes, and is rated for installations up to 80 lb \/ 36 kg.\u003c\/p\u003e\u003cp\u003eHigh-grade cold rolled steel with a scratch-resistant epoxy powder coat carries the load, and the included decorative plastic cover finishes the ceiling plate. At 1.6 lb \/ 0.7 kg, the adapter is the fixed anchor point the rest of the drop threads into.\u003c\/p\u003e\u003cp\u003eThe black finish matches QualGear Pro-AV pipes, connectors, and mounts, so the finished drop reads as one system. Pairs with the QG-PRO-PM-50-B projector bracket, a 1.5-in NPT extension pipe, and the NPT pipe connector; the QualGear projector mount kit in black (QG-KIT-CA series) is the complete-package step up. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462012614,"sku":"QG-PRO-PM-CA-B","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-CA-B.jpg?v=1738614886"},{"product_id":"pro-av-flat-ceiling-adapter-white-qg-pro-pm-ca-w","title":"QualGear Pro-AV Flat Ceiling Adapter, White, QG-PRO-PM-CA-W","description":"\u003cp\u003eA projector drop is only as solid as its anchor. This flat ceiling adapter in white ties a Pro-AV projector drop into a single wood joist, structural wood, or structural concrete, accepts all standard 1.5-in NPT threaded pipes, and is rated for installations up to 80 lb \/ 36 kg.\u003c\/p\u003e\u003cp\u003eHigh-grade cold rolled steel with a scratch-resistant epoxy powder coat carries the load, and the included decorative plastic cover finishes the ceiling plate. At 1.6 lb \/ 0.7 kg, the adapter is the fixed anchor point the rest of the drop threads into.\u003c\/p\u003e\u003cp\u003eThe white finish matches QualGear Pro-AV pipes, connectors, and mounts, so the finished drop reads as one system. Pairs with the QG-PRO-PM-50-W projector bracket, a 1.5-in NPT extension pipe, and the NPT pipe connector; the QualGear projector mount kit in white (QG-KIT-CA series) is the complete-package step up. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462013446,"sku":"QG-PRO-PM-CA-W","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-CA-W_1.jpg?v=1738614884"},{"product_id":"pro-av-drop-ceiling-adapter-2-ft-x-6-in-qg-pro-pm-sca-w","title":"QualGear Pro-AV Drop Ceiling Adapter, 2'x6\", QG-PRO-PM-SCA-W","description":"\u003cp\u003eHang a projector from a suspended ceiling without giving up the grid. This drop ceiling adapter mounts above a standard 2 ft x 2 ft \/ 61 x 61 cm or 2 ft x 4 ft \/ 61 x 122 cm grid system and accepts any standard 1.5 in NPT threaded pipe, carrying projector drops up to 60 lb \/ 27.2 kg.\u003c\/p\u003e\u003cp\u003eThe plate installs above the false ceiling tile and suspends from the structure overhead — suspension wire, four turnbuckles, and anchors for wood or concrete are in the box. Cold rolled steel with a scratch-resistant fused epoxy finish, in white, 24.8 x 10.3 x 2.4 in \/ 63 x 26.2 x 6.1 cm and 9.75 lb \/ 4.4 kg.\u003c\/p\u003e\u003cp\u003eIt is one piece of the QualGear Pro-AV 1.5 in NPT system: pair it with the QG-PRO-PM-50-W projector bracket, an NPT extension pipe, and a pipe connector to set the exact drop, or step up to the QG-KIT-S-3IN-W drop ceiling kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462020358,"sku":"QG-PRO-PM-SCA-W","price":92.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pro-pm-sca-w-1.jpg?v=1784962574"},{"product_id":"pro-av-drop-ceiling-adapter-2-ft-x-2-ft-qg-pro-pm-sca2-w","title":"QualGear Pro-AV Drop Ceiling Adapter, 2'x2', QG-PRO-PM-SCA2-W","description":"\u003cp\u003ePut a projector on a suspended ceiling and keep the grid looking finished. This drop ceiling adapter fits flush inside standard 2 ft x 2 ft \/ 61 x 61 cm or 2 ft x 4 ft \/ 61 x 122 cm grid systems — replacing a full smaller tile or half of a larger tile — and accepts any standard 1.5 in NPT threaded pipe for projector drops up to 50 lb \/ 22.7 kg.\u003c\/p\u003e\u003cp\u003eThe panel suspends from the structure above the grid; suspension wire, four turnbuckles, and anchors for wood or concrete are in the box. Cold rolled steel with a scratch-resistant fused epoxy finish, in white, 25 x 18 x 3 in \/ 63.5 x 45.7 x 7.6 cm and 13.05 lb \/ 5.9 kg.\u003c\/p\u003e\u003cp\u003eIt joins the QualGear Pro-AV 1.5 in NPT system: pair it with the QG-PRO-PM-50-W projector bracket, an NPT extension pipe, and a pipe connector to set the drop, or step up to the QG-KIT-S2-3IN-W drop ceiling kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462021382,"sku":"QG-PRO-PM-SCA2-W","price":115.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-pro-pm-sca2-w-1.jpg?v=1784962674"},{"product_id":"pro-av-truss-ceiling-adapter-black-qg-pro-pm-tca-b","title":"QualGear Pro-AV Truss Ceiling Adapter, QG-PRO-PM-TCA-B","description":"\u003cp\u003eHang a projector drop from stage truss or an exposed beam. This truss ceiling adapter clamps with 10 mm \/ 0.39 in U-bolts to round, square, or rectangular truss and I-beams up to 3 in \/ 76 mm wide by 3.5 in \/ 89 mm high, accepts any standard 1.5 in NPT threaded pipe, and is rated for installations up to 400 lb \/ 181 kg.\u003c\/p\u003e\u003cp\u003eThe clamp covers the sections installers actually meet — round, square, and rectangular truss and I-beams within the 3 in \/ 76 mm by 3.5 in \/ 89 mm envelope. Cold rolled steel with a scratch-resistant epoxy powder coat, in black, 7.2 x 6.1 x 2.4 in \/ 18.3 x 15.5 x 6.1 cm. In the box: the ceiling adapter.\u003c\/p\u003e\u003cp\u003eIt anchors the QualGear Pro-AV 1.5 in NPT system to structure: pair it with the QG-PRO-PM-50-B projector bracket, an NPT extension pipe, and a pipe connector to set the drop, or take the QG-KIT-TA-3IN-B truss ceiling mount kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462023366,"sku":"QG-PRO-PM-TCA-B","price":43.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-TCA-B.jpg?v=1738614874"},{"product_id":"sloped-ceiling-adapter-black-qg-pro-pm-vca-b","title":"QualGear Sloped Ceiling Adapter, Black, QG-PRO-PM-VCA-B","description":"\u003cp\u003eA sloped ceiling should not decide where the projector hangs. This sloped ceiling adapter mounts to cathedral and vaulted ceilings and adjusts from 0 to 90 degrees, aligning a 1.5 in NPT projector drop to the ceiling slope — rated for installations up to 300 lb \/ 136 kg.\u003c\/p\u003e\u003cp\u003eSet the angle to match the pitch, then run the drop: the adapter accepts any standard 1.5 in NPT threaded pipe. Cold rolled steel with a scratch-resistant epoxy powder coat, in black, 7.4 x 4.7 x 3.8 in \/ 18.8 x 11.9 x 9.7 cm. In the box: the ceiling adapter.\u003c\/p\u003e\u003cp\u003eIt brings the QualGear Pro-AV 1.5 in NPT system to angled ceilings: pair it with the QG-PRO-PM-50-B projector bracket, an NPT extension pipe, and a pipe connector to set the drop, or take the QG-KIT-VA-3IN-B sloped ceiling mount kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462024966,"sku":"QG-PRO-PM-VCA-B","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-VCA-B_1.jpg?v=1738614872"},{"product_id":"sloped-ceiling-adapter-white-qg-pro-pm-vca-w","title":"QualGear Sloped Ceiling Adapter, White, QG-PRO-PM-VCA-W","description":"\u003cp\u003eCathedral and vaulted ceilings put every mounting point on an angle; this sloped ceiling adapter absorbs it. Mounted to the slope, it adjusts from 0 to 90 degrees to align a 1.5 in NPT projector drop, and is rated for installations up to 300 lb \/ 136 kg.\u003c\/p\u003e\u003cp\u003eSet the angle to the ceiling pitch and run the drop — any standard 1.5 in NPT threaded pipe threads in. Cold rolled steel with a scratch-resistant epoxy powder coat, in white, 7.4 x 4.7 x 3.8 in \/ 18.8 x 11.9 x 9.7 cm. In the box: the ceiling adapter.\u003c\/p\u003e\u003cp\u003eThe white finish matches QualGear Pro-AV pipes, connectors, and mounts, so the whole drop reads as one system. Pair it with the QG-PRO-PM-50-W projector bracket, an NPT extension pipe, and a pipe connector, or take the QG-KIT-VA-3IN-W sloped ceiling mount kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462026566,"sku":"QG-PRO-PM-VCA-W","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-PRO-PM-VCA-W_1.jpg?v=1738614871"},{"product_id":"fixed-wire-rope-tv-wall-mount-37-70-in-qg-tm-001","title":"QualGear 37-70 in Fixed Wire Rope TV Wall Mount, Stainless Steel, QG-TM-001","description":"\u003cp\u003eHang a 37-70 in \/ 94-178 cm TV the way you'd hang a picture: the wire rope design sets flat or curved screens less than 0.6 in \/ 1.5 cm from the wall and carries up to 110 lb \/ 50 kg. Fit is decided by VESA pattern and TV weight first — the supported VESA patterns depend on wall type and are listed in the specifications below, and the size range is the guide.\u003c\/p\u003e\u003cp\u003eA built-in kickstand holds the TV away from the wall for cable hookup, and the hardware pack ships pre-sorted for wood studs (16 in \/ 40.6 cm and 24 in \/ 61 cm spacing), concrete, and brick. In the box: wall mount, pre-sorted mounting hardware for studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eBecause the mount is fixed, the screen sits closer to the wall than a moving arm allows; if you need more capacity, the QG-TM-030-BLK heavy duty fixed mount is the step up. Pairs with a QualGear HDMI cable and cable clips for a clean hookup behind the TV. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462028038,"sku":"QG-TM-001","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-001-1.jpg?v=1784959745"},{"product_id":"ultra-slim-fixed-tv-wall-mount-37-70-in-black-qg-tm-002-blk","title":"QualGear 37-70 in Ultra Slim Fixed TV Wall Mount, Black, QG-TM-002-BLK","description":"\u003cp\u003eSet a 37-70 in \/ 94-178 cm flat screen 0.39 in \/ 1 cm off the wall — closer than most picture frames sit. This ultra slim fixed mount carries up to 88 lb \/ 40 kg on VESA patterns from 200x200 to 800x400 mm; check your TV's pattern and weight first, and treat the size range as the guide.\u003c\/p\u003e\u003cp\u003eThe spring-lock design makes attaching the display — and lifting it back off — straightforward, and after installation the TV glides a few inches left or right to center the screen on the wall. Hardware ships pre-sorted for wood studs (16 in \/ 40.6 cm and 24 in \/ 61 cm spacing), concrete, and brick; on 16 in \/ 40.6 cm stud walls, mounting to three studs is strongly recommended. In the box: wall mount, pre-sorted mounting hardware, and the installation manual.\u003c\/p\u003e\u003cp\u003eIf your TV is heavier, the QG-TM-030-BLK heavy duty fixed mount is the step up. Pairs with a QualGear HDMI cable and cable clips for a clean hookup behind the TV. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462029382,"sku":"QG-TM-002-BLK","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-002-blk-1.jpg?v=1784959896"},{"product_id":"full-motion-tv-wall-mount-23-55-in-white-qg-tm-004-wht","title":"QualGear 23-55 in Full Motion TV Wall Mount, Low Profile, White, QG-TM-004-WHT","description":"\u003cp\u003ePull the TV out, angle it toward the seat, then push it nearly flat when the room goes back to normal. This UL Listed full motion mount in white carries 23-55 in \/ 58-140 cm TVs up to 77 lb \/ 35 kg, extends 16.7 in \/ 42.4 cm from the wall, and retracts to 1.8 in \/ 4.6 cm. Fit is decided by VESA pattern (75x75-400x400 mm) and TV weight first; the size range is the guide.\u003c\/p\u003e\u003cp\u003eThe arm tilts and swivels for off-center seating, and post-installation rotation of up to 3 degrees clockwise or counterclockwise levels the screen without re-drilling. A decorative cover conceals the assembly hardware and included cable clips keep the moving arm's cabling organized. In the box: wall mount, decorative cover, cable clips, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eThe UL listing applies to this specific model. The QG-TM-032-BLK heavy duty full motion mount steps up to 37-70 in \/ 94-178 cm screens. Pairs with a QualGear HDMI cable and reusable cable ties for the moving arm's cable run. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462030470,"sku":"QG-TM-004-WHT","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/853770005030.main.jpg?v=1738614866"},{"product_id":"full-motion-tv-wall-mount-23-42-in-white-qg-tm-005-wht","title":"QualGear 23-42 in Full Motion TV Wall Mount, Low Profile, White, QG-TM-005-WHT","description":"\u003cp\u003eA smaller screen doesn't have to stay flat on the wall. This UL Listed full motion mount in white moves 23-42 in \/ 58-107 cm TVs up to 77 lb \/ 35 kg — out to 16.7 in \/ 42.4 cm, angled to the seat, then back to 1.8 in \/ 4.6 cm from the wall. Check VESA pattern (75x75-200x200 mm) and TV weight first; the size range is the guide.\u003c\/p\u003e\u003cp\u003eTilt and swivel aim the screen at off-center seating, and rotation of up to 3 degrees clockwise or counterclockwise levels the display after it is hung. A decorative cover conceals the assembly hardware, included cable clips route the moving arm's cables, and the pre-sorted hardware pack covers wood studs, concrete, and brick. In the box: wall mount, decorative cover, cable clips, pre-sorted mounting hardware, and the installation manual.\u003c\/p\u003e\u003cp\u003eThe UL listing applies to this specific model. If the next TV is bigger, the QG-TM-032-BLK heavy duty full motion mount covers 37-70 in \/ 94-178 cm screens. Pairs with a QualGear HDMI cable and reusable cable ties for the arm's cable run. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462031622,"sku":"QG-TM-005-WHT","price":57.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/853770005047.main.jpg?v=1738614864"},{"product_id":"full-motion-swivel-tv-wall-mount-23-42-in-qg-tm-006-blk","title":"QualGear 23-42 in Full Motion TV Wall Mount with Swivel Arm, Black, QG-TM-006-BLK","description":"\u003cp\u003ePoint the screen at the bed, the desk, or the sofa — the swivel arm and tilting VESA plate on this full motion mount aim 23-42 in \/ 58-107 cm TVs up to 66 lb \/ 30 kg wherever the room needs them, while the slim design keeps the set 1.9 in \/ 4.8 cm from the wall. Match VESA pattern (75x75-200x200 mm) and TV weight first; the size range is the guide.\u003c\/p\u003e\u003cp\u003eA key-shaped hole on the VESA plate speeds up hanging the TV, built-in cable management and included cable clips keep the wiring organized, and an add-on bubble level helps square the install. Hardware ships pre-sorted for wood studs, concrete, and brick. In the box: wall mount, add-on bubble level, cable clips, pre-sorted mounting hardware, and the installation manual.\u003c\/p\u003e\u003cp\u003eIt suits bedrooms, RVs, offices, and living rooms — anywhere the viewing angle changes through the day. For a larger screen, the QG-TM-A-012 ultra slim mount steps up to 23-55 in \/ 58-140 cm. Pairs with a QualGear HDMI cable and cable clips for a clean hookup behind the TV. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462032198,"sku":"QG-TM-006-BLK","price":53.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-006-blk-1.jpg?v=1784960309"},{"product_id":"full-motion-tv-wall-mount-13-27-in-black-qg-tm-007-blk","title":"QualGear 13-27 in Full Motion TV Wall Mount, Low Profile, Black, QG-TM-007-BLK","description":"\u003cp\u003eSmall screens go where counters, cabinets, and bunks leave little room. This full motion mount puts a 13-27 in \/ 33-69 cm TV on a swivel arm with a tilting VESA plate, holds up to 66 lb \/ 30 kg, and sits 1.9 in \/ 4.8 cm from the wall. Fit check: VESA 75x75 or 100x100 mm and TV weight first; the size range is the guide.\u003c\/p\u003e\u003cp\u003eThe arm swivels and the plate tilts to angle the screen toward a kitchen stool, an RV bunk, or a small-room seat, and the low profile keeps the TV close to the wall when pushed back. Hardware ships pre-sorted for wood studs, concrete, and brick. In the box: wall mount, pre-sorted mounting hardware, and the installation manual.\u003c\/p\u003e\u003cp\u003eWhen the next TV is bigger, the QG-TM-020-BLK ultra low profile mount steps up to 23-42 in \/ 58-107 cm screens. Pairs with a QualGear HDMI cable and cable clips for a clean hookup behind the TV. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462033094,"sku":"QG-TM-007-BLK","price":34.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-007-blk-1.jpg?v=1784960434"},{"product_id":"articulating-tv-wall-mount-low-profile-23-42-in-qg-tm-020-blk","title":"QualGear 23-42 in Articulating TV Wall Mount, Ultra Low Profile, Black, QG-TM-020-BLK","description":"\u003cp\u003eOff-center seating still gets a straight-on picture — this full motion articulating mount swivels the screen 90 degrees left or right toward whoever is watching. Fit is set by VESA pattern and TV weight: it suits displays with 75x75, 100x100, 200x100, or 200x200 mm patterns weighing up to 66 lb \/ 30 kg, typically 23-42 in \/ 58.4-106.7 cm screens.\u003c\/p\u003e\u003cp\u003eTilt runs +5 to -15 degrees, and the ultra low profile arm retracts the TV to 1.8 in \/ 4.6 cm from the wall when pushed back. After hanging, post-installation leveling rotates the screen 3 degrees clockwise or counterclockwise, and the included bubble level confirms it is straight without new holes. In the box: wall mount, bubble level, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eThe arm arrives pre-assembled with integrated cable management and decorative covers. A QualGear high speed HDMI cable and reusable cable ties keep the moving arm's cabling tidy; for 23-55 in \/ 58.4-139.7 cm screens, the QG-TM-A-012 steps up the size range. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462035078,"sku":"QG-TM-020-BLK","price":41.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-020-blk-1.jpg?v=1784960611"},{"product_id":"articulating-tv-wall-mount-kit-23-47-in-qg-tm-021-blk","title":"QualGear 23-47 in Articulating TV Wall Mount Kit, Black, QG-TM-021-BLK","description":"\u003cp\u003eOne box covers the whole hookup: a full motion TV wall mount kit with a 6 ft \/ 1.8 m high speed HDMI 2.0 cable included. Fit is set by VESA pattern and TV weight — it suits displays with 75x75 to 400x400 mm patterns weighing up to 66 lb \/ 30 kg, typically 23-47 in \/ 58.4-119.4 cm screens and some 55 in \/ 139.7 cm models.\u003c\/p\u003e\u003cp\u003eThe arm stretches to 18 in \/ 45.7 cm across three pivot points, swivels 90 degrees left or right, and tilts +5 to -15 degrees to cut glare; pushed back, the TV sits 2 in \/ 5.1 cm from the wall. Post-installation leveling rotates the screen 3 degrees either way. In the box: wall mount, 6 ft \/ 1.8 m HDMI 2.0 cable, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eThe arm arrives pre-assembled with integrated cable management, and QualGear reusable cable ties keep the moving run tidy. For 37-70 in \/ 94-177.8 cm displays, the QG-TM-032-BLK heavy duty mount steps up. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462036230,"sku":"QG-TM-021-BLK","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/01_main_front.jpg?v=1738614857"},{"product_id":"articulating-tv-wall-mount-13-27-in-black-qg-tm-022-blk","title":"QualGear 13-27 in Articulating TV Wall Mount, Black, QG-TM-022-BLK","description":"\u003cp\u003eSmall screens rarely hang exactly where the viewer sits — this articulating mount swivels, tilts, and rotates the display to meet them. Fit is set by VESA pattern and TV weight: it suits displays with 75x75 or 100x100 mm patterns weighing up to 44 lb \/ 20 kg, typically 13-27 in \/ 33-68.6 cm screens.\u003c\/p\u003e\u003cp\u003eThe arm swivels 90 degrees left or right and tilts +5 to -15 degrees, and the screen rotates a full 360 degrees — portrait or landscape is a hand movement, not a re-install. Pushed back, the TV sits 2.1 in \/ 5.3 cm from the wall. In the box: wall mount, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eThe arm arrives pre-assembled with integrated cable management and decorative covers. A QualGear high speed HDMI cable and cable clip holders keep the hookup clean behind the screen; for 23-42 in \/ 58.4-106.7 cm TVs, the QG-TM-020-BLK steps up the size range. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462037126,"sku":"QG-TM-022-BLK","price":30.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-022-blk-1.jpg?v=1784960711"},{"product_id":"ultra-slim-articulating-tv-wall-mount-23-55-in-qg-tm-a-012","title":"QualGear 23-55 in Articulating TV Wall Mount, Ultra Slim, Black, QG-TM-A-012","description":"\u003cp\u003eA larger living-room TV asks for reach and a safety listing — this UL Listed full motion mount provides both. Fit is set by VESA pattern and TV weight: it suits displays with 75x75 to 400x400 mm patterns weighing up to 77 lb \/ 35 kg, typically 23-55 in \/ 58.4-139.7 cm screens.\u003c\/p\u003e\u003cp\u003eThe ultra slim arm stretches to 20 in \/ 50.8 cm across three pivot points, swivels 90 degrees left or right, and tilts +10 to -20 degrees to cut glare; retracted, the TV sits 1.8 in \/ 4.6 cm from the wall. Post-installation leveling rotates the screen 3 degrees either way. In the box: wall mount, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eThis model carries a UL listing, and the arm arrives pre-assembled with integrated cable management. A QualGear high speed HDMI cable and reusable cable ties keep the moving run tidy; for 37-70 in \/ 94-177.8 cm displays, the QG-TM-032-BLK heavy duty mount steps up. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462037638,"sku":"QG-TM-A-012","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/853770005283.main.jpg?v=1738614854"},{"product_id":"ultra-slim-articulating-tv-wall-mount-23-42-in-qg-tm-a-013","title":"QualGear 23-42 in Articulating TV Wall Mount, Ultra Slim, Black, QG-TM-A-013","description":"\u003cp\u003eAn aluminum arm keeps this articulating mount light on the wall and easy to move by hand. Fit is set by VESA pattern and TV weight: it suits displays with 75x75, 100x100, 200x100, or 200x200 mm patterns weighing up to 44 lb \/ 20 kg, typically 23-42 in \/ 58.4-106.7 cm screens.\u003c\/p\u003e\u003cp\u003eThe arm reaches 12.6 in \/ 32 cm and retracts to 1.8 in \/ 4.6 cm, and it tilts and swivels with fingertip effort to cut glare. A slide-in VESA plate eases hanging, and post-installation leveling positions the TV after it is up. In the box: wall mount, cable clips, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.\u003c\/p\u003e\u003cp\u003eCable clips come in the box to keep the hookup organized along the arm, and a QualGear high speed HDMI cable completes the connection. The step-up in this size range is the QG-TM-020-BLK ultra low profile mount. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462038854,"sku":"QG-TM-A-013","price":45.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-a-013-1.jpg?v=1784960989"},{"product_id":"ultra-slim-fixed-tv-wall-mount-32-55-in-qg-tm-f-014","title":"QualGear 32-55 in Ultra Slim Fixed TV Wall Mount, Black, QG-TM-F-014","description":"\u003cp\u003eFor a built-in look, this UL Listed ultra slim fixed TV wall mount holds the screen 0.5 in \/ 1.3 cm off the wall — flush enough to read as part of it. Fit is set by VESA pattern and TV weight: it suits displays with 100x100 to 400x400 mm patterns weighing up to 88 lb \/ 40 kg, typically 32-55 in \/ 81.3-139.7 cm screens.\u003c\/p\u003e\u003cp\u003ePull-down cords release the display from the bracket, so the TV attaches and detaches without prying behind a flush-mounted screen. An integrated bubble level confirms alignment during installation, and the pre-sorted hardware covers wood studs, concrete, and brick. In the box: wall mount, pre-sorted mounting hardware, and the installation manual.\u003c\/p\u003e\u003cp\u003eThis model carries a UL listing. A QualGear high speed HDMI cable and cable clip holders keep the hookup flat and tidy in the slim space behind the screen; for 37-70 in \/ 94-177.8 cm displays, the QG-TM-030-BLK heavy duty fixed mount steps up. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462039046,"sku":"QG-TM-F-014","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/QG-TM-F-014.jpg?v=1738614851"},{"product_id":"tilting-tv-wall-mount-23-47-in-qg-tm-t-015","title":"QualGear 23-47 in Tilting TV Wall Mount, Low Profile, Black, QG-TM-T-015","description":"\u003cp\u003eHang a TV where windows or lighting wash out the picture, then angle it down toward the seats. This low profile tilting TV wall mount fits most 23-47 in \/ 58-119 cm TVs — and some 55 in \/ 140 cm models — up to 110 lb \/ 50 kg, tilting up to 10 degrees to cut glare and improve the viewing angle.\u003c\/p\u003e\u003cp\u003eMatch the fit by VESA pattern and TV weight first: the mount supports patterns from 200x200 to 400x400 mm. The slim design places the screen 1.6 in \/ 4.1 cm from the wall, and the included hardware covers wood studs, concrete, and brick. In the box: wall mount, add-on bubble level, pre-sorted mounting hardware, and the installation manual.\u003c\/p\u003e\u003cp\u003eFor larger screens, the QualGear QG-TM-031-BLK steps up to 37-70 in \/ 94-178 cm TVs in the UL Listed heavy duty tilting line. A QualGear HDMI cable and cable clip holders keep the hookup behind the TV clean. Backed by a 1-year limited warranty (parts only) and a 30-day RMA, with US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21462039814,"sku":"QG-TM-T-015","price":62.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-tm-t-015-1.jpg?v=1784961091"},{"product_id":"projector-mount-kit-black-qg-kit-ca-3in-b","title":"QualGear Projector Mount Kit, Black, QG-KIT-CA-3IN-B","description":"\u003cp\u003eOne box, one complete ceiling drop. This Pro-AV projector mounting kit combines the QG-PRO-PM-50-B projector mount, the QG-PRO-PM-CA-B single joist ceiling adapter, and a 3 in \/ 7.6 cm 1.5 in NPT threaded pipe — covering single wood joist, wood beam, wood stud, and concrete ceilings.\u003c\/p\u003e\u003cp\u003eThe included mount carries projectors up to 70 lb \/ 31.8 kg and aligns the image with tilt of +\/- 20 degrees, swivel of +\/- 8 degrees, and rotation of +\/- 180 degrees. A full-color installation manual and presorted hardware are in the box.\u003c\/p\u003e\u003cp\u003eBecause the kit runs on the standard 1.5 in NPT thread, the drop length is not fixed: swap the included 3 in \/ 7.6 cm pipe for a QualGear NPT extension pipe — joined with a pipe connector — when the projector needs to hang lower. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471376070,"sku":"QG-KIT-CA-3IN-B","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/149972372014973018101_20copy.jpg?v=1738614833"},{"product_id":"projector-mount-kit-white-qg-kit-ca-3in-w","title":"QualGear Projector Ceiling Mount Kit, Single Joist, White, QG-KIT-CA-3IN-W","description":"\u003cp\u003eHang a projector from a solid ceiling with everything sourced in one box. This QualGear Pro-AV kit pairs the QG-PRO-PM-50-W projector mount with the QG-PRO-PM-CA-W single joist ceiling adapter and a 3 in \/ 7.6 cm, 1.5 in NPT threaded pipe, in white — a complete ceiling drop for single wood joist, wood beam, wood stud, and concrete ceilings, in home theaters and commercial rooms alike.\u003c\/p\u003e\u003cp\u003eThe adapter fastens to the ceiling structure, the pipe threads in, and the mount carries projectors up to 70 lb \/ 31.8 kg — with Tilt, Swivel, and Rotation across 12 adjustment points to square the image after installation. In the box: projector mount, single joist ceiling adapter, 3 in \/ 7.6 cm NPT threaded pipe, full color installation manual, and presorted hardware.\u003c\/p\u003e\u003cp\u003eThe 1.5 in NPT thread is the QualGear Pro-AV system standard — swap the included pipe for a longer QualGear extension pipe, or join lengths with a QualGear NPT pipe connector, when the projector needs a lower drop. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471379334,"sku":"QG-KIT-CA-3IN-W","price":107.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-kit-ca-3in-w-1.jpg?v=1784961618"},{"product_id":"drop-ceiling-kit-6-in-x-2-ft-white-qg-kit-s-3in-w","title":"QualGear Drop Ceiling Projector Mount Kit, 6\"x2', White, QG-KIT-S-3IN-W","description":"\u003cp\u003ePut a projector below a drop ceiling without improvising above the grid. This QualGear Pro-AV kit combines the QG-PRO-PM-50-W projector mount, the QG-PRO-PM-SCA-W suspended ceiling adapter, and a 3 in \/ 7.6 cm, 1.5 in NPT threaded pipe, in white — a complete ceiling drop for drop or suspended ceilings on standard grid systems, in offices and other grid-ceiling rooms.\u003c\/p\u003e\u003cp\u003eThe 6 x 24 in \/ 15.2 x 61 cm adapter mounts above the grid tile, the pipe threads in, and the mount carries projectors up to 70 lb \/ 31.8 kg — with Tilt, Swivel, and Rotation across 12 adjustment points to square the image after installation. In the box: projector mount, suspended ceiling adapter, 3 in \/ 7.6 cm NPT threaded pipe, full color installation manual, and presorted hardware.\u003c\/p\u003e\u003cp\u003eThe 1.5 in NPT thread is the QualGear Pro-AV system standard — when the projector needs a lower drop below the grid, swap the included pipe for a longer QualGear extension pipe or join lengths with a QualGear NPT pipe connector. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471381958,"sku":"QG-KIT-S-3IN-W","price":162.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-kit-s-3in-w-1.jpg?v=1784961718"},{"product_id":"drop-ceiling-kit-2-ft-x-2-ft-white-qg-kit-s2-3in-w","title":"QualGear Drop Ceiling Projector Mount Kit, 2'x2', White, QG-KIT-S2-3IN-W","description":"\u003cp\u003eFinish a suspended-ceiling projector install so it looks built in. This QualGear Pro-AV kit combines the QG-PRO-PM-50-W projector mount, the QG-PRO-PM-SCA2-W suspended ceiling adapter — a flush 2 x 2 ft \/ 61 x 61 cm ceiling tile design — and a 3 in \/ 7.6 cm, 1.5 in NPT threaded pipe, in white, for drop or suspended ceilings on standard grid systems.\u003c\/p\u003e\u003cp\u003eThe adapter takes a full tile position on the grid and sits flush, the pipe threads in, and the mount carries projectors up to 70 lb \/ 31.8 kg — with Tilt, Swivel, and Rotation across 12 adjustment points to square the image after installation. In the box: projector mount, suspended ceiling adapter, 3 in \/ 7.6 cm NPT threaded pipe, full color installation manual, and presorted hardware.\u003c\/p\u003e\u003cp\u003eThe 1.5 in NPT thread is the QualGear Pro-AV system standard — when the projector needs a lower drop below the grid, swap the included pipe for a longer QualGear extension pipe or join lengths with a QualGear NPT pipe connector. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471384646,"sku":"QG-KIT-S2-3IN-W","price":191.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-kit-s2-3in-w-2.jpg?v=1784961919"},{"product_id":"truss-ceiling-mount-kit-black-qg-kit-ta-3in-b","title":"QualGear Truss Projector Mount Kit, Black, QG-KIT-TA-3IN-B","description":"\u003cp\u003ePut a projector on a truss without fabricating a bracket. This QualGear Pro-AV kit combines the QG-PRO-PM-50-B projector mount, the QG-PRO-PM-TCA-B truss ceiling adapter, and a 3 in \/ 7.6 cm, 1.5 in NPT threaded pipe, in black — a complete drop for round, square, or rectangular trusses up to 3 in \/ 76 mm wide and 3.5 in \/ 89 mm high, in entertainment venues and stage rigs.\u003c\/p\u003e\u003cp\u003eThe adapter fits the truss, the pipe threads in, and the mount carries projectors up to 70 lb \/ 31.8 kg — with Tilt, Swivel, and Rotation across 12 adjustment points to square the image after installation. In the box: projector mount, truss ceiling adapter, 3 in \/ 7.6 cm NPT threaded pipe, full color installation manual, and presorted hardware.\u003c\/p\u003e\u003cp\u003eThe 1.5 in NPT thread is the QualGear Pro-AV system standard — when the projector needs a lower drop below the truss, swap the included pipe for a longer QualGear extension pipe or join lengths with a QualGear NPT pipe connector. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471385542,"sku":"QG-KIT-TA-3IN-B","price":143.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/150212784407-08-2017_TRUSS.jpg?v=1738614825"},{"product_id":"sloped-ceiling-mount-kit-black-qg-kit-va-3in-b","title":"QualGear Sloped Ceiling Projector Mount Kit, Black, QG-KIT-VA-3IN-B","description":"\u003cp\u003eMount a projector from a ceiling that runs at an angle. This QualGear Pro-AV kit pairs the QG-PRO-PM-50-B projector mount with the QG-PRO-PM-VCA-B vaulted ceiling adapter — adjustable from 0 to 90 degrees for sloped ceilings — and a 3 in \/ 7.6 cm, 1.5 in NPT threaded pipe, in black, a complete drop for cathedral or vaulted ceilings.\u003c\/p\u003e\u003cp\u003eThe adapter installs on the sloped surface, the pipe threads in, and the mount carries projectors up to 70 lb \/ 31.8 kg — with Tilt, Swivel, and Rotation across 12 adjustment points to square the image after installation. In the box: projector mount, vaulted ceiling adapter, 3 in \/ 7.6 cm NPT threaded pipe, full color installation manual, and presorted hardware.\u003c\/p\u003e\u003cp\u003eThe 1.5 in NPT thread is the QualGear Pro-AV system standard — on a high vaulted ceiling, swap the included pipe for a longer QualGear extension pipe or join lengths with a QualGear NPT pipe connector to bring the projector down to throw height. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471387974,"sku":"QG-KIT-VA-3IN-B","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-kit-va-3in-b-1.jpg?v=1784962247"},{"product_id":"sloped-ceiling-mount-kit-white-qg-kit-va-3in-w","title":"QualGear Sloped Ceiling Projector Mount Kit, White, QG-KIT-VA-3IN-W","description":"\u003cp\u003eKeep the projector install clean on a ceiling that runs at an angle. This QualGear Pro-AV kit pairs the QG-PRO-PM-50-W projector mount with the QG-PRO-PM-VCA-W vaulted ceiling adapter — adjustable from 0 to 90 degrees for sloped ceilings — and a 3 in \/ 7.6 cm, 1.5 in NPT threaded pipe, in white, a complete drop for cathedral or vaulted ceilings.\u003c\/p\u003e\u003cp\u003eThe adapter installs on the sloped surface, the pipe threads in, and the mount carries projectors up to 70 lb \/ 31.8 kg — with Tilt, Swivel, and Rotation across 12 adjustment points to square the image after installation. In the box: projector mount, vaulted ceiling adapter, 3 in \/ 7.6 cm NPT threaded pipe, full color installation manual, and presorted hardware.\u003c\/p\u003e\u003cp\u003eThe 1.5 in NPT thread is the QualGear Pro-AV system standard — on a high vaulted ceiling, swap the included pipe for a longer QualGear extension pipe or join lengths with a QualGear NPT pipe connector to bring the projector down to throw height. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21471389830,"sku":"QG-KIT-VA-3IN-W","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/qg-kit-va-3in-w-1.jpg?v=1784962271"},{"product_id":"reusable-cable-tie-roll-15-ft-black-vr1-b-1-p","title":"QualGear Reusable Cable Tie Roll, 3\/4 in x 15 ft, Black, VR1-B-1-P","description":"\u003cp\u003eCut a tie to the length the bundle actually needs, wrap it, and open it again when the setup changes. This black reusable self-gripping cable tie roll gives you a 15 ft \/ 4.5 m length of hook-and-loop material, 3\/4 in \/ 20 mm wide, that grips onto itself — no hardware, no single-use ties.\u003c\/p\u003e\u003cp\u003eIn the box: 1 black reusable self-gripping cable tie roll in a poly bag.\u003c\/p\u003e\u003cp\u003eWhen one roll won't cover the job, the 2-pack (VR1-B-1-P 2PK) doubles the material. Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502230662,"sku":"VR1-B-1-P","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/vr1-b-1-p-1.jpg?v=1784967272"},{"product_id":"reusable-cable-tie-roll-15-ft-white-vr2-w-1-p","title":"QualGear Reusable Cable Tie Roll, 3\/4 in x 15 ft, White, VR2-W-1-P","description":"\u003cp\u003eCut a tie to the length the bundle actually needs, wrap it, and open it again when the setup changes. This white reusable self-gripping cable tie roll gives you a 15 ft \/ 4.5 m length of hook-and-loop material, 3\/4 in \/ 20 mm wide, that grips onto itself — no hardware, no single-use ties.\u003c\/p\u003e\u003cp\u003eIn the box: 1 white reusable self-gripping cable tie roll in a poly bag.\u003c\/p\u003e\u003cp\u003eWhen one roll won't cover the job, the 2-pack (VR2-W-1-P 2PK) doubles the material. Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502232454,"sku":"VR2-W-1-P","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/vr2-w-1-p-1.jpg?v=1784967347"},{"product_id":"reusable-cable-ties-6-in-assorted-50-pack-vt1-mc-50-p","title":"QualGear Reusable Cable Ties, 1\/2 x 6 in, Assorted, 50 Pack, VT1-MC-50-P","description":"\u003cp\u003eWrap a bundle, and when the run changes, open the tie and wrap it again. This 50-pack of reusable self-gripping cable ties — 1\/2 in \/ 12 mm wide and 6 in \/ 150 mm long, in five assorted colors — lets you group cable runs and tell them apart by color, without single-use ties.\u003c\/p\u003e\u003cp\u003eIn the box: 50 reusable self-gripping cable ties in a poly bag.\u003c\/p\u003e\u003cp\u003eFor bundles beyond the 6 in \/ 150 mm wrap, the VR1-B-1-P reusable cable tie roll cuts ties to any length. Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502234182,"sku":"VT1-MC-50-P","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/vt1-mc-50-p-1.jpg?v=1784967371"},{"product_id":"reusable-cable-ties-6-in-black-50-pack-vt2-b-50-p","title":"QualGear Reusable Cable Ties, 1\/2 x 6 in, Black, 50 Pack, VT2-B-50-P","description":"\u003cp\u003eWrap a bundle, and when the run changes, open the tie and wrap it again. This 50-pack of black reusable self-gripping cable ties — 1\/2 in \/ 12 mm wide and 6 in \/ 150 mm long — keeps bundles uniform and discreet, without single-use ties.\u003c\/p\u003e\u003cp\u003eIn the box: 50 black reusable self-gripping cable ties in a poly bag.\u003c\/p\u003e\u003cp\u003eFor bundles beyond the 6 in \/ 150 mm wrap, the VR1-B-1-P reusable cable tie roll cuts ties to any length in the same black. Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502235206,"sku":"VT2-B-50-P","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/vt2-b-50-p-1486662702black.png?v=1783952425"},{"product_id":"reusable-cable-ties-6-in-assorted-5-pack-vt3-mc-5-p","title":"QualGear Reusable Cable Ties, 1\/2 x 6 in, Assorted, 5 Pack, VT3-MC-5-P","description":"\u003cp\u003eWrap a bundle, and when the run changes, open the tie and wrap it again. This 5-pack of reusable self-gripping polyamide cable ties — 1\/2 in \/ 12 mm wide and 6 in \/ 150 mm long, in five assorted colors — is a starter quantity for desk and AV cable runs, without single-use ties.\u003c\/p\u003e\u003cp\u003eIn the box: 5 reusable self-gripping cable ties in a poly bag.\u003c\/p\u003e\u003cp\u003eOutfitting more than a few bundles? The VT1-MC-50-P steps up to 50 ties in the same size and assorted colors. Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502236230,"sku":"VT3-MC-5-P","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/14866629025PCMULTICOLOR.jpg?v=1738614814"},{"product_id":"nail-in-cable-clips-6-mm-white-100-pack-cc1-w-100-p","title":"QualGear Nail-In Cable Clips, 6 mm \/ 0.24 in, White, 100 Pack, CC1-W-100-P","description":"\u003cp\u003eRoute RG6 coax, HDMI, or network cable along a baseboard and it stays where you nailed it. These white 6 mm \/ 0.24 in nail-in cable clips fasten a single run flush to walls and trim with the included mounting nails — no adhesive, no sag between anchor points.\u003c\/p\u003e\u003cp\u003eIn the box: 100 white nail-in cable clips with mounting nails. Match the clip to the cable: 6 mm \/ 0.24 in clips suit cable of about that diameter, keeping routing neat and helping prevent cable damage and tangling in home, office, and professional installs.\u003c\/p\u003e\u003cp\u003ePairs with QualGear reusable cable ties (VT2-B-50-P) to bundle a run before clipping; for mixed cable sizes, the CCX1-W-400-C canister carries four clip sizes — 400 white clips in one container. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502237446,"sku":"CC1-W-100-P","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/products\/01_bef587c1-58d1-4bae-8297-79c6cc679ff9.jpg?v=1738614813"},{"product_id":"nail-in-cable-clips-6-mm-black-100-pack-cc2-b-100-p","title":"QualGear Nail-In Cable Clips, 6 mm \/ 0.24 in, Black, 100 Pack, CC2-B-100-P","description":"\u003cp\u003eRun RG6 coax, HDMI, or network cable along a wall and it stays exactly where you nailed it. These black 6 mm \/ 0.24 in nail-in cable clips fasten a single run flush to walls and trim with the included mounting nails — no adhesive, no sag between anchor points.\u003c\/p\u003e\u003cp\u003eEach clip nails into the wall to secure a running cable along walls and trim, keeping the routing neat and helping prevent cable damage and tangling in home, office, and professional installations. In the bag: 100 black nail-in cable clips with mounting nails included.\u003c\/p\u003e\u003cp\u003eMatch the clip to the cable — 6 mm \/ 0.24 in clips suit cable of about that diameter; for mixed sizes, the QualGear CCX2-B-400-C canister carries four clip sizes, 400 black clips in one container. QualGear reusable cable ties (VT2-B-50-P) bundle a run before you clip it. Backed by a 1-year limited manufacturer's warranty (parts only) and a 30-day RMA, with US-based phone support at +1-972-423-5015.\u003c\/p\u003e","brand":"QualGear","offers":[{"title":"Default Title","offer_id":21502238662,"sku":"CC2-B-100-P","price":8.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1343\/8121\/files\/nail-in-cable-clips-6-mm-black-100-pack-cc2-b-100-p-1.jpg?v=1784967022"}],"url":"https:\/\/qualgear.com\/collections\/all.oembed?page=4","provider":"QualGear","version":"1.0","type":"link"}