Golf Simulator Projector Floor Mount Enclosure
SKU Projector-shield
No se pudo cargar la disponibilidad de retiro
Vendido por QualGear, gestionado por nuestro socio especialista en golf
Haces tu pedido y pagas aquí en QualGear. El envío, la ayuda de instalación, la garantía y las devoluciones de este artículo los gestiona nuestro socio, un especialista en simuladores de golf.
Envío — gestionado y enviado directamente por nuestro socio especialista. Recibirás el seguimiento por correo electrónico cuando se envíe.
Pago seguro — haces tu pedido y pagas en QualGear, con el mismo pago seguro que cualquier artículo de la tienda.
Cómo funciona la asistencia para este artículo
QualGear se ha asociado con The Indoor Golf Shop, un especialista en simuladores de golf, para ofrecerte este producto. Esto es lo que hace cada uno:
- Compras aquí. Tu pedido, tu pago y los correos del pedido vienen todos de QualGear — el pago es el mismo pago seguro de QualGear que usarías para cualquier artículo.
- Ellos lo envían. The Indoor Golf Shop prepara y envía este artículo directamente a tu dirección.
- Ellos dan la asistencia. La ayuda de instalación, la garantía, las devoluciones y los repuestos de este artículo los gestiona el equipo de The Indoor Golf Shop.
- ¿No sabes a quién preguntar? Contacta primero con la asistencia de QualGear y te pondremos en contacto con la persona adecuada de nuestro socio.
Key Specifications
| Compatibility / Requirements | |
| Projector type | Short throw projectors |
| Named compatible models | Optoma EH200ST, Optoma EH412ST |
| Dimensions & Weight | |
| Exterior (D x W x H) | 23 x 14 x 7.25 in / 58.4 x 35.6 x 18.4 cm |
| Interior (D x W x H) | 12.5 x 9.5 x 4.75 in / 31.8 x 24.1 x 12.1 cm |
| Shipping weight | 15 lb / 6.8 kg |
| Materials & Finish | |
| Shell material | 3/8 in / 9.5 mm ABS plastic |
| Ramp surface | Turf-covered |
| Performance / Capacity | |
| Cooling | Passive air vent slots on both sides; no additional fans required |
| Care / Installation | |
| Assembly | Downloadable assembly guide provided |
| Placement | Beside or in front of the tee area |
| Warranty & Support | |
| Warranty | Provided and honored by our partner under their product warranty |
| Support | Setup and product questions handled by our golf specialist partner |
Keeps a short throw projector safe at floor level — no ceiling mount required.
The Projector Shield floor mount enclosure lets you run a golf simulator projector at floor level instead of hanging it from the ceiling. Built from 3/8 in / 9.5 mm ABS plastic, it fully encases a short throw projector and isolates it from carpet and the surrounding environment.
Place it beside or in front of the tee area: the turf-covered ramp lets low shots glide up and continue into the screen. Air vent slots on both sides let the projector cool naturally with no additional fans, and the floor position eliminates the ceiling mount, overhead electrical work, and video wire runs through the room. The enclosure is recommended for short throw projectors and works with the Optoma EH200ST and Optoma EH412ST.
Interior clearance runs 12.5 x 9.5 x 4.75 in / 31.8 x 24.1 x 12.1 cm, so check your projector's footprint before ordering; a downloadable assembly guide walks through setup. Optoma model names are stated for compatibility only. Fulfillment, setup help, warranty, and returns for this item are handled by our golf specialist partner — your order and checkout stay on QualGear.
Planning a full golf simulator build?
QualGear can spec the projector mount, impact screen, AV mounting, and cabling for your bay. Talk to us about your build.
Floor placement, no ceiling install
Sets the projector at floor level, eliminating the ceiling mount, overhead electrical, and video wire runs a hung projector needs.
Turf ramp deflects low shots
Positioned beside or in front of the tee, the turf-covered ramp lets low shots glide up and continue into the screen.
Vented for natural cooling
Air vent slots on both sides of the enclosure keep the projector from overheating — no additional cooling fans needed.
Rigid ABS shell
Molded from 3/8 in / 9.5 mm ABS plastic, the enclosure fully encases the projector and isolates it from carpet and room traffic.
Sized for short throw projectors
Interior clearance of 12.5 x 9.5 x 4.75 in / 31.8 x 24.1 x 12.1 cm suits short throw models, including the Optoma EH200ST and EH412ST.
Reviews
No reviews yet.
Write a review
Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.