QualGear sloped ceiling adapter black qg-pro-pm-vca-b.

QualGear Sloped Ceiling Adapter, Black, QG-PRO-PM-VCA-B

SKU QG-PRO-PM-VCA-B

$35.95
$35.95

Los pedidos realizados antes de 2:00 pm CT se envían el mismo día laborable.

Devoluciones de 30 días — devuélvelo en un plazo de 30 días desde la fecha de compra.
5-year limited manufacturer's warranty, parts only
Installation manual PDF ¿Es compatible con mi proyector? Compruébalo antes de comprar
QualGear Sloped Ceiling Adapter, Black, QG-PRO-PM-VCA-B
$35.95
$35.95

Will it fit?

Check the fit before you buy.

  1. Find your equipment's numbers

    For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.

  2. Compare against this mount's Key Specifications

    Check this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.

    View key specifications Open the full fit checker

Always confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.

Key Specifications

1.5 in NPT threaded pipe Cathedral and vaulted ceilings Up to 300 lb / 136 kg 0–90 degrees
Especificaciones técnicas completas
Compatibility / Requirements
Interface1.5 in NPT threaded pipe
Mounting surfaceCathedral and vaulted ceilings
Performance / Capacity
Load ratingUp to 300 lb / 136 kg
Angle adjustment0–90 degrees
Dimensions & Weight
Product dimensions7.4 x 4.7 x 3.8 in / 18.8 x 11.9 x 9.7 cm
Materials & Finish
MaterialHigh-grade cold rolled steel, scratch-resistant epoxy powder coat
ColorBlack
Care / Installation
In the boxCeiling adapter
Warranty & Support
Warranty5-year limited manufacturer's warranty, parts only

Aligns a projector drop to the ceiling slope — adjustable 0–90 degrees.

A sloped ceiling should not decide where the projector hangs. This sloped ceiling adapter mounts to cathedral and vaulted ceilings and adjusts from 0 to 90 degrees, aligning a 1.5 in NPT projector drop to the ceiling slope — rated for installations up to 300 lb / 136 kg.

Set the angle to match the pitch, then run the drop: the adapter accepts any standard 1.5 in NPT threaded pipe. Cold rolled steel with a scratch-resistant epoxy powder coat, in black, 7.4 x 4.7 x 3.8 in / 18.8 x 11.9 x 9.7 cm. In the box: the ceiling adapter.

It brings the QualGear Pro-AV 1.5 in NPT system to angled ceilings: pair it with the QG-PRO-PM-50-B projector bracket, an NPT extension pipe, and a pipe connector to set the drop, or take the QG-KIT-VA-3IN-B sloped ceiling mount kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.

Made for cathedral and vaulted ceilings

Mounts on cathedral and vaulted ceilings, carrying the projector drop from the slope itself.

Adjusts from 0 to 90 degrees

Angle adjustment from 0 to 90 degrees aligns the 1.5 in NPT drop to the ceiling slope.

Rated to 300 lb / 136 kg

Rated for installations up to 300 lb / 136 kg, stated as the maximum load for the drop.

Accepts standard 1.5 in NPT pipe

Accepts any standard 1.5 in NPT threaded pipe — the interface shared across QualGear Pro-AV pipes, connectors, and mounts.

Steel build, powder-coat finish

Cold rolled steel with a scratch-resistant epoxy powder coat in black, matching QualGear Pro-AV pipes, connectors, and mounts.

Documentation

Installation manual PDF Specification sheet PDF · especificaciones y capacidades de carga

Reviews

Ratings from where we sell

Estas valoraciones se recopilaron directamente de los marketplaces enlazados a continuación, no del sistema de reseñas propio de QualGear.

4.1 de 5 según 33 valoraciones de marketplaces

Write a review

Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.

Tu valoración

Solo publicamos tu nombre y la inicial de tu apellido.

Se usa para verificar tu compra. Nunca se publica.

Agiliza vincular tu reseña con tu pedido — lo encontrarás en el correo de confirmación del pedido.

Your review may be published on this product page with your first name and last initial.

Complete your setup

QualGear Pro-AV projector bracket black.
Hasta $50 de descuento

QualGear Pro-AV Projector Bracket, Black QG-PRO-PM-50-B

  • Max load 50 lb / 22.7 kg
  • Pitch +/-20 degrees (6 adjustment points)
  • Roll +/-8 degrees (6 adjustment points)
$49.95
$49.95 $99.95
QualGear Pro-AV 1.5 in NPT projector mount extension pipe.

QualGear Pro-AV 1.5 in NPT Projector Mount Extension Pipe QG-PRO-PM

  • Length options 1.5 in / 3.8 cm, 3 in / 7.6 cm, 6 in / 15.2 cm, 12 in / 30.5 cm, 24 in / 61 cm, 36 in / 91.4 cm
  • Max weight capacity 800 lb / 363 kg
  • Thread standard 1.5-in NPT
A partir de $9.95
A partir de $9.95
QualGear Pro-AV 1.5 in NPT pipe connector with or without cable opening.

QualGear Pro-AV 1.5 in NPT Pipe Connector, With or Without Cable Opening QG-PRO-PM

  • Function Joins two or more pipes to extend drop length
  • Max weight capacity 300 lb / 136 kg
  • Styles With cable opening (PCO), without opening (PC)
A partir de $10.95
A partir de $10.95

Compare other options

QualGear sloped ceiling projector mount kit, black, assembled side view (QG-KIT-VA-3IN-B)
Agotado

QualGear Sloped Ceiling Projector Mount Kit, Black QG-KIT-VA-3IN-B

  • Ceiling types Cathedral or vaulted ceilings
  • Included mount QG-PRO-PM-50-B
  • Included adapter QG-PRO-PM-VCA-B vaulted ceiling adapter
$119.95
$119.95