QualGear Pro-AV projector bracket white.

QualGear Pro-AV Projector Bracket, White, QG-PRO-PM-50-W

SKU QG-PRO-PM-50-W

$49.95
$49.95 $99.95

Los pedidos realizados antes de 2:00 pm CT se envían el mismo día laborable.

Devoluciones de 30 días — devuélvelo en un plazo de 30 días desde la fecha de compra.
5-year limited manufacturer's warranty, parts only
Installation manual PDF ¿Es compatible con mi proyector? Compruébalo antes de comprar
QualGear Pro-AV Projector Bracket, White, QG-PRO-PM-50-W
$49.95
$49.95 $99.95

Will it fit?

Check the fit before you buy.

  1. Find your equipment's numbers

    For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.

  2. Compare against this mount's Key Specifications

    Check this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.

    View key specifications Open the full fit checker

Always confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.

Key Specifications

50 lb / 22.7 kg +/-20 degrees (6 adjustment points) +/-8 degrees (6 adjustment points) -180 to +180 degrees
Especificaciones técnicas completas
Performance / Capacity
Max load50 lb / 22.7 kg
Pitch+/-20 degrees (6 adjustment points)
Roll+/-8 degrees (6 adjustment points)
Rotation-180 to +180 degrees
Compatibility / Requirements
Interface1.5-in NPT threaded pipe
Completes with1.5-in NPT extension pipe and ceiling adapter, sold separately
Dimensions & Weight
Mounting range5.1-18.5 in / 130-470 mm
Profile (ceiling to projector)3.46 in / 88 mm
Materials & Finish
MaterialAluminum / high-grade cold rolled steel, scratch-resistant epoxy powder coat
ColorWhite
Care / Installation
In the boxTwo-piece projector mount with pre-assembled mounting interface, pre-sorted hardware pack
Installation manualAvailable (PDF)
Warranty & Support
Warranty5-year limited manufacturer's warranty, parts only
SupportUS-based phone support, +1-972-423-5015

Locks pitch and roll at 12 points on a standard 1.5-in NPT pipe drop.

The numbers an installer checks first: 50 lb / 22.7 kg rated load, standard 1.5-in NPT interface, 3.46 in / 88 mm ceiling-to-projector profile. This two-piece Pro-AV projector bracket in white threads onto standard 1.5-in NPT pipe for boardrooms, classrooms, entertainment venues, and home theaters.

Twelve adjustment points — six for pitch, six for roll — hold the aim after setup, so the picture stays where it was dialed in. Pitch adjusts +/-20 degrees, roll +/-8 degrees, and rotation spans -180 to +180 degrees. A quick-release feature speeds projector attachment and removal, and the pre-assembled mounting interface with pre-sorted hardware pack shortens the install.

Aluminum and high-grade cold rolled steel carry a scratch-resistant epoxy powder coat in white. Complete the drop with a QualGear 1.5-in NPT extension pipe and a flat, drop, or sloped ceiling adapter for your surface — or step up to the complete QualGear projector mount kit in white (QG-KIT-CA series). Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.

Holds projectors up to 50 lb

Rated for projectors up to 50 lb / 22.7 kg on a standard 1.5-in NPT threaded pipe.

12 points lock the aim

Six pitch and six roll adjustment points keep the projector from slipping after setup.

Adjusts on three axes

Pitch adjusts +/-20 degrees, roll +/-8 degrees, and rotation spans -180 to +180 degrees.

Quick-release attachment and removal

The quick-release feature speeds projector attachment and removal.

Arrives ready to install

Pre-assembled mounting interface and pre-sorted hardware pack shorten installation.

Low 3.46 in profile

Holds the projector 3.46 in / 88 mm from the ceiling, with a 5.1-18.5 in / 130-470 mm mounting range.

Documentation

Installation manual PDF

Reviews

Ratings from where we sell

Estas valoraciones se recopilaron directamente de los marketplaces enlazados a continuación, no del sistema de reseñas propio de QualGear.

4.5 de 5 según 124 valoraciones de marketplaces

Write a review

Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.

Tu valoración

Solo publicamos tu nombre y la inicial de tu apellido.

Se usa para verificar tu compra. Nunca se publica.

Agiliza vincular tu reseña con tu pedido — lo encontrarás en el correo de confirmación del pedido.

Your review may be published on this product page with your first name and last initial.

Complete your setup

QualGear Pro-AV 1.5 in NPT projector mount extension pipe.

QualGear Pro-AV 1.5 in NPT Projector Mount Extension Pipe QG-PRO-PM

  • Length options 1.5 in / 3.8 cm, 3 in / 7.6 cm, 6 in / 15.2 cm, 12 in / 30.5 cm, 24 in / 61 cm, 36 in / 91.4 cm
  • Max weight capacity 800 lb / 363 kg
  • Thread standard 1.5-in NPT
A partir de $9.95
A partir de $9.95
QualGear Pro-AV flat ceiling adapter white qg-pro-pm-ca-w.

QualGear Pro-AV Flat Ceiling Adapter, White QG-PRO-PM-CA-W

  • Load rating Up to 120 lb / 54.4 kg
  • Interface 1.5-in NPT threaded pipe
  • Mounting surface Wood joist, structural wood, structural concrete
$26.95
$26.95
QualGear Pro-AV drop ceiling adapter 2'x6", qg-pro-pm-sca-w.
Agotado

QualGear Pro-AV Drop Ceiling Adapter, 2'x6" QG-PRO-PM-SCA-W

  • Interface 1.5 in NPT threaded pipe
  • Mounting surface Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (mounts above the false ceiling tile)
  • Load rating Up to 60 lb / 27.2 kg
$92.95
$92.95
QualGear Pro-AV drop ceiling adapter 2'x2'.

QualGear Pro-AV Drop Ceiling Adapter, 2'x2' QG-PRO-PM-SCA2-W

  • Interface 1.5 in NPT threaded pipe
  • Mounting surface Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (fits flush in place of a ceiling tile)
  • Tile fit Replaces one 2 ft x 2 ft / 61 x 61 cm tile; in a 2 ft x 4 ft / 61 x 122 cm grid opening it fills one half, and a 2 ft x 2 ft / 61 x 61 cm ceiling tile (not included) fills the other
$115.95
$115.95

Compare other options

QualGear projector ceiling mount kit, single joist, white, assembled front view (QG-KIT-CA-3IN-W)

QualGear Projector Ceiling Mount Kit, Single Joist, White QG-KIT-CA-3IN-W

  • Ceiling types Single wood joist, wood beam, wood stud, and concrete ceilings
  • Included mount QG-PRO-PM-50-W
  • Included adapter QG-PRO-PM-CA-W single joist ceiling adapter
$107.95
$107.95