QualGear 23-47 in Articulating TV Wall Mount Kit, Black, QG-TM-021-BLK
SKU: QG-TM-021-BLK
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 400×400. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Max load | 66 lb / 30 kg |
| TV size range | 23-47 in / 58.4-119.4 cm (some 55 in / 139.7 cm) |
| Mount type | Full motion, articulating (three pivot points) |
| Swivel | 90 degrees left/right |
| Tilt | +5 to -15 degrees |
| Level adjustment | 3 degrees either way |
| Compatibility / Requirements | |
| Wall types | Wood studs, concrete, brick |
| Dimensions & Weight | |
| Extension | 18 in / 45.7 cm |
| Retracted profile | 2 in / 5.1 cm |
| Materials & Finish | |
| Color | Black |
| Care / Installation | |
| What's included | Wall mount, 6 ft / 1.8 m high speed HDMI 2.0 cable, decorative covers, pre-sorted mounting hardware, installation manual |
| Cable management | Integrated in the pre-assembled arm |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015; 30-day RMA |
Arm reaches 18 in / 45.7 cm and a 6 ft / 1.8 m HDMI 2.0 cable comes in the box.
One box covers the whole hookup: a full motion TV wall mount kit with a 6 ft / 1.8 m high speed HDMI 2.0 cable included. Fit is set by VESA pattern and TV weight — it suits displays with 75x75 to 400x400 mm patterns weighing up to 66 lb / 30 kg, typically 23-47 in / 58.4-119.4 cm screens and some 55 in / 139.7 cm models.
The arm stretches to 18 in / 45.7 cm across three pivot points, swivels 90 degrees left or right, and tilts +5 to -15 degrees to cut glare; pushed back, the TV sits 2 in / 5.1 cm from the wall. Post-installation leveling rotates the screen 3 degrees either way. In the box: wall mount, 6 ft / 1.8 m HDMI 2.0 cable, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.
The arm arrives pre-assembled with integrated cable management, and QualGear reusable cable ties keep the moving run tidy. For 37-70 in / 94-177.8 cm displays, the QG-TM-032-BLK heavy duty mount steps up. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
HDMI cable included in the kit
Ships with a 6 ft / 1.8 m high speed HDMI 2.0 cable, so the hookup is covered without a second order.
Reaches 18 in from the wall
Three pivot points extend the arm to 18 in / 45.7 cm, pulling the screen out and around toward the seating.
Swivels 90 degrees, tilts to cut glare
Swivels 90 degrees left or right and tilts +5 to -15 degrees, so reflections move off the screen.
Retracts to 2 in when pushed back
Folds back to 2 in / 5.1 cm from the wall, keeping a slim profile between viewings.
Level the TV after it hangs
Post-installation leveling rotates the screen 3 degrees either way, so alignment does not depend on drilling the holes exactly level.
Pre-assembled arm, pre-sorted hardware
The arm ships pre-assembled with integrated cable management; hardware for wood studs, concrete, and brick arrives pre-sorted by wall type.
Documentation
Reviews
Ratings from where we sell
These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.
4.7 out of 5 across 809 marketplace ratings
-
Amazon.ca398 ratingsLast checked 2026-07-29View listing on Amazon.ca (opens in a new tab)
-
Amazon.com411 ratingsLast checked 2026-07-26View listing on Amazon.com (opens in a new tab)
Complete your setup
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
QualGear Multipurpose Adhesive Cable Clip Holders, Black, 10 Pack, CCH-B-10-B
- Type Adhesive cable clip holder
- Quantity 10
- Holder material Thermoplastic polyurethane (TPU)
Compare other options
QualGear 37-70 in UL Listed Heavy Duty Full Motion TV Wall Mount, Black, QG-TM-032-BLK
- Max load 88 lb / 40 kg
- TV size range 37-70 in / 94-178 cm (flat and curved)
- Swivel 90 degrees clockwise/counterclockwise