Pro-AV

Pro-AV projector ceiling adapters

Ceiling adapters anchor a Pro-AV 1.5 in NPT drop. Flat adapters hold 80 lb / 36 kg on joists or concrete, sloped adapters swing 0 to 90 degrees at 300 lb / 136 kg, truss clamps carry 400 lb / 181 kg, and drop ceiling plates fit 2 x 2 ft and 2 ft x 6 in tiles.

7 products · From $26.95

7 products

Clear all
  • QualGear Pro-AV truss ceiling adapter qg-pro-pm-tca-b.

    QualGear Pro-AV Truss Ceiling Adapter QG-PRO-PM-TCA-B

    • Interface 1.5 in NPT threaded pipe
    • Mounting surface Round, square, or rectangular truss and I-beams up to 3 in / 76 mm wide by 3.5 in / 89 mm high
    • Load rating Up to 400 lb / 181 kg
    $43.95
    $43.95
  • QualGear Pro-AV flat ceiling adapter black qg-pro-pm-ca-b.

    QualGear Pro-AV Flat Ceiling Adapter, Black QG-PRO-PM-CA-B

    • Load rating Up to 80 lb / 36 kg
    • Interface 1.5-in NPT threaded pipe
    • Mounting surface Wood joist, structural wood, structural concrete
    $26.95
    $26.95
  • QualGear sloped ceiling adapter black qg-pro-pm-vca-b.

    QualGear Sloped Ceiling Adapter, Black QG-PRO-PM-VCA-B

    • Interface 1.5 in NPT threaded pipe
    • Mounting surface Cathedral and vaulted ceilings
    • Load rating Up to 300 lb / 136 kg
    $35.95
    $35.95
  • QualGear Pro-AV flat ceiling adapter white qg-pro-pm-ca-w.

    QualGear Pro-AV Flat Ceiling Adapter, White QG-PRO-PM-CA-W

    • Load rating Up to 80 lb / 36 kg
    • Interface 1.5-in NPT threaded pipe
    • Mounting surface Wood joist, structural wood, structural concrete
    $26.95
    $26.95
  • QualGear sloped ceiling adapter white qg-pro-pm-vca-w.

    QualGear Sloped Ceiling Adapter, White QG-PRO-PM-VCA-W

    • Interface 1.5 in NPT threaded pipe
    • Mounting surface Cathedral and vaulted ceilings
    • Load rating Up to 300 lb / 136 kg
    $35.95
    $35.95
  • QualGear Pro-AV drop ceiling adapter 2'x6", qg-pro-pm-sca-w.
    Sold out

    QualGear Pro-AV Drop Ceiling Adapter, 2'x6" QG-PRO-PM-SCA-W

    • Interface 1.5 in NPT threaded pipe
    • Mounting surface Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (mounts above the false ceiling tile)
    • Load rating Up to 60 lb / 27.2 kg
    $92.95
    $92.95
  • QualGear Pro-AV drop ceiling adapter 2'x2'.

    QualGear Pro-AV Drop Ceiling Adapter, 2'x2' QG-PRO-PM-SCA2-W

    • Interface 1.5 in NPT threaded pipe
    • Mounting surface Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (fits flush inside the ceiling tile)
    • Tile fit Replaces a 2 ft x 2 ft / 61 x 61 cm tile or half of a 2 ft x 4 ft / 61 x 122 cm tile
    $115.95
    $115.95

These seven QualGear Pro-AV projector ceiling adapters anchor the upper end of a 1.5-in NPT drop to a flat, sloped, or exposed truss ceiling.

As with the rest of the Pro-AV lineup, each adapter carries a 5-year limited manufacturer's warranty, parts only.

Check what fits your setup
New here?Short, factual guides — no upsell.
Choosing your mount What is VESA? Cable management basics