QualGear Pro-AV Drop Ceiling Adapter, 2'x2', QG-PRO-PM-SCA2-W
SKU: QG-PRO-PM-SCA2-W
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
| Compatibility / Requirements | |
| Interface | 1.5 in NPT threaded pipe |
| Mounting surface | Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (fits flush inside the ceiling tile) |
| Tile fit | Replaces a 2 ft x 2 ft / 61 x 61 cm tile or half of a 2 ft x 4 ft / 61 x 122 cm tile |
| Performance / Capacity | |
| Load rating | Up to 50 lb / 22.7 kg |
| Dimensions & Weight | |
| Product dimensions | 25 x 18 x 3 in / 63.5 x 45.7 x 7.6 cm |
| Product weight | 13.05 lb / 5.9 kg |
| Materials & Finish | |
| Material | High-grade cold rolled steel, scratch-resistant fused epoxy finish |
| Color | White |
| Care / Installation | |
| In the box | Ceiling adapter with suspension wire, four turnbuckles, and anchors for wood or concrete structures |
| Warranty & Support | |
| Warranty | 5-year limited manufacturer's warranty, parts only |
Fits flush inside the ceiling tile — carries drops up to 50 lb / 22.7 kg.
Put a projector on a suspended ceiling and keep the grid looking finished. This drop ceiling adapter fits flush inside standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems — replacing a full smaller tile or half of a larger tile — and accepts any standard 1.5 in NPT threaded pipe for projector drops up to 50 lb / 22.7 kg.
The panel suspends from the structure above the grid; suspension wire, four turnbuckles, and anchors for wood or concrete are in the box. Cold rolled steel with a scratch-resistant fused epoxy finish, in white, 25 x 18 x 3 in / 63.5 x 45.7 x 7.6 cm and 13.05 lb / 5.9 kg.
It joins the QualGear Pro-AV 1.5 in NPT system: pair it with the QG-PRO-PM-50-W projector bracket, an NPT extension pipe, and a pipe connector to set the drop, or step up to the QG-KIT-S2-3IN-W drop ceiling kit. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Fits flush inside the tile
Replaces a full 2 ft x 2 ft / 61 x 61 cm tile or half of a larger tile, flush in the finished grid.
Accepts standard 1.5 in NPT pipe
Accepts any standard 1.5 in NPT threaded pipe — the interface shared across QualGear Pro-AV pipes, connectors, and mounts.
Carries drops up to 50 lb
Rated for projector installations up to 50 lb / 22.7 kg, stated as the maximum load for the drop.
Hardware for wood or concrete included
Ships with suspension wire, four turnbuckles, and anchors for wood or concrete structures above the grid.
Steel panel, fused epoxy finish
Cold rolled steel with a scratch-resistant fused epoxy finish in white, matching QualGear Pro-AV pipes, connectors, and mounts.
Documentation
Reviews
No reviews yet.
Complete your setup
QualGear Pro-AV Projector Bracket, White, QG-PRO-PM-50-W
- Max load 70 lb / 31.8 kg
- Tilt +/-20 degrees (6 adjustment points)
- Swivel +/-8 degrees (6 adjustment points)
QualGear Pro-AV 1.5 in NPT Projector Mount Extension Pipe, QG-PRO-PM
- Length options 1.5 in / 3.8 cm, 3 in / 7.6 cm, 6 in / 15.2 cm, 12 in / 30.5 cm, 24 in / 61 cm, 36 in / 91.4 cm
- Max weight capacity 800 lb / 363 kg
- Thread standard 1.5-in NPT
QualGear Pro-AV 1.5 in NPT Pipe Connector, With or Without Cable Opening, QG-PRO-PM
- Function Joins two or more pipes to extend drop length
- Max weight capacity 300 lb / 136 kg
- Styles With cable opening (PCO), without opening (PC)
Compare other options
QualGear Drop Ceiling Projector Mount Kit, 2'x2', White, QG-KIT-S2-3IN-W
- Ceiling types Drop or suspended ceilings (standard grid systems)
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-SCA2-W suspended ceiling adapter