QualGear Pro-AV Projector Bracket, White, QG-PRO-PM-50-W
SKU: QG-PRO-PM-50-W
Most in-stock orders placed by 2:00 pm CT on business days are processed the same day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day processing
Most in-stock orders placed by the cutoff on business days are processed the same day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day processing on most in-stock orders
- Transit set by the carrier
Weekend and holiday orders are processed the next business day. Need it urgently? Call 972-423-5015 before you order so we can confirm stock and same-day shipping.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
View key specifications Open the full fit checkerCheck this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when its mounting pattern and weight are within the published specifications. A screen-size range is a recommendation, not a limit.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
| Performance / Capacity | |
| Max load | 50 lb / 22.7 kg |
| Pitch | +/-20 degrees (6 adjustment points) |
| Roll | +/-8 degrees (6 adjustment points) |
| Rotation | -180 to +180 degrees |
| Compatibility / Requirements | |
| Interface | 1.5-in NPT threaded pipe |
| Completes with | 1.5-in NPT extension pipe and ceiling adapter, sold separately |
| Dimensions & Weight | |
| Mounting range | 5.1-18.5 in / 130-470 mm |
| Profile (ceiling to projector) | 3.46 in / 88 mm |
| Materials & Finish | |
| Material | Aluminum / high-grade cold rolled steel, scratch-resistant epoxy powder coat |
| Color | White |
| Care / Installation | |
| In the box | Two-piece projector mount with pre-assembled mounting interface, pre-sorted hardware pack |
| Installation manual | Available (PDF) |
| Warranty & Support | |
| Warranty | 5-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015 |
Locks pitch and roll at 12 points on a standard 1.5-in NPT pipe drop.
The numbers an installer checks first: 50 lb / 22.7 kg rated load, standard 1.5-in NPT interface, 3.46 in / 88 mm ceiling-to-projector profile. This two-piece Pro-AV projector bracket in white threads onto standard 1.5-in NPT pipe for boardrooms, classrooms, entertainment venues, and home theaters.
Twelve adjustment points — six for pitch, six for roll — hold the aim after setup, so the picture stays where it was dialed in. Pitch adjusts +/-20 degrees, roll +/-8 degrees, and rotation spans -180 to +180 degrees. A quick-release feature speeds projector attachment and removal, and the pre-assembled mounting interface with pre-sorted hardware pack shortens the install.
Aluminum and high-grade cold rolled steel carry a scratch-resistant epoxy powder coat in white. Complete the drop with a QualGear 1.5-in NPT extension pipe and a flat, drop, or sloped ceiling adapter for your surface — or step up to the complete QualGear projector mount kit in white (QG-KIT-CA series). Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Holds projectors up to 50 lb
Rated for projectors up to 50 lb / 22.7 kg on a standard 1.5-in NPT threaded pipe.
12 points lock the aim
Six pitch and six roll adjustment points keep the projector from slipping after setup.
Adjusts on three axes
Pitch adjusts +/-20 degrees, roll +/-8 degrees, and rotation spans -180 to +180 degrees.
Quick-release attachment and removal
The quick-release feature speeds projector attachment and removal.
Arrives ready to install
Pre-assembled mounting interface and pre-sorted hardware pack shorten installation.
Low 3.46 in profile
Holds the projector 3.46 in / 88 mm from the ceiling, with a 5.1-18.5 in / 130-470 mm mounting range.
Reviews
Ratings from where we sell
These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.
4.5 out of 5 across 124 marketplace ratings
-
Amazon.ca62 ratingsLast checked 2026-10-06View listing on Amazon.ca (opens in a new tab)
-
Amazon.com62 ratingsLast checked 2026-10-06View listing on Amazon.com (opens in a new tab)
Write a review
Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.
Complete your setup
QualGear Pro-AV 1.5 in NPT Projector Mount Extension Pipe, QG-PRO-PM
- Length options 1.5 in / 3.8 cm, 3 in / 7.6 cm, 6 in / 15.2 cm, 12 in / 30.5 cm, 24 in / 61 cm, 36 in / 91.4 cm
- Max weight capacity 800 lb / 363 kg
- Thread standard 1.5-in NPT
QualGear Pro-AV Flat Ceiling Adapter, White, QG-PRO-PM-CA-W
- Load rating Up to 120 lb / 54.4 kg
- Interface 1.5-in NPT threaded pipe
- Mounting surface Wood joist, structural wood, structural concrete
QualGear Pro-AV Drop Ceiling Adapter, 2'x6", QG-PRO-PM-SCA-W
- Interface 1.5 in NPT threaded pipe
- Mounting surface Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (mounts above the false ceiling tile)
- Load rating Up to 60 lb / 27.2 kg
QualGear Pro-AV Drop Ceiling Adapter, 2'x2', QG-PRO-PM-SCA2-W
- Interface 1.5 in NPT threaded pipe
- Mounting surface Standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems (fits flush in place of a ceiling tile)
- Tile fit Replaces one 2 ft x 2 ft / 61 x 61 cm tile; in a 2 ft x 4 ft / 61 x 122 cm grid opening it fills one half, and a 2 ft x 2 ft / 61 x 61 cm ceiling tile (not included) fills the other
Compare other options
QualGear Projector Ceiling Mount Kit, Single Joist, White, QG-KIT-CA-3IN-W
- Ceiling types Single wood joist, wood beam, wood stud, and concrete ceilings
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-CA-W single joist ceiling adapter