QualGear Multipurpose Adhesive Cable Clip Holders, Black, 10 Pack, CCH-B-10-B
SKU: CCH-B-10-B
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Key Specifications
| Performance / Capacity | |
| Type | Adhesive cable clip holder |
| Quantity | 10 |
| Materials & Finish | |
| Holder material | Thermoplastic polyurethane (TPU) |
| Adhesive | 3M acrylic-foam tape |
| Color | Black |
| Care / Installation | |
| Mounting | Adhesive (3M acrylic-foam tape; residue-free removal) |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
Flexible TPU holders keep desk cords routed — no drilling, no sticky residue.
Keep a desk's cords where you can reach them instead of dropped behind the furniture. Each holder — 10 to a pack, in black — is molded from flexible thermoplastic polyurethane (TPU) and mounts to the desk or workspace surface with 3M acrylic-foam adhesive tape — no drilling, no nails.
Stretch a slot open, seat the cord, and the slip-resistant TPU grips it firmly without scratching or pinching the jacket — an unplugged cable stays at the desk edge instead of sliding off behind the furniture. The tape contours slightly to textured surfaces, so the holders suit desks and finishes where nail-in clips are not an option. In the box: 10 black adhesive cable clip holders.
Where generic stick-on clips rely on an unnamed adhesive, these use industry-standard 3M acrylic-foam tape that resists UV degradation. Pairs with QualGear 10 mm / 0.39 in nail-in cable clips (CC10-B-100-P) for the wall-run sections of the same install, and with QualGear reusable cable ties (VT2-B-50-P) to bundle cords before routing. Backed by a 1-year limited manufacturer's warranty, parts only, plus a 30-day RMA and US-based phone support at +1-972-423-5015.
3M adhesive mount, no drilling
Industry-standard 3M acrylic-foam tape holds without drilling, nails, or screws, distributing stress evenly across the bond.
Flexible TPU grips without scratching
Slots stretch open and the slip-resistant TPU holds cables firmly without scratching or pinching the jacket.
Removes without leaving residue
The 3M tape peels away without sticky residue, so rerouting the workspace doesn't mean scraping or refinishing the surface.
Keeps unplugged cords at the desk
Holds an unplugged cable at the desk edge instead of letting it drop behind the furniture.
For surfaces you can't nail
Nothing pierces the mounting surface, and the tape contours slightly to textured finishes where nail-in clips are not an option.
10 per pack for a workstation
10 black holders per pack — enough to route a full workstation's cords.
Reviews
Ratings from where we sell
These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.
4.5 out of 5 across 6 marketplace ratings
-
Home Depot6 ratingsLast checked 2026-07-29View listing on Home Depot (opens in a new tab)
Complete your setup
QualGear Nail-In Cable Clips, 10 mm / 0.39 in, Black, 100 Pack, CC10-B-100-P
- Clip size 10 mm / 0.39 in
- Quantity 100
- Color Black
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50