QualGear Low Profile Universal Projector Ceiling Mount, White, PRB-717-WHT
SKU PRB-717-WHT
Los pedidos realizados antes de 2:00 pm CT se envían el mismo día laborable.
No se pudo cargar la disponibilidad de retiro
Asistencia en EE. UU.
Personas reales en Anna, Texas — no un centro de llamadas en el extranjero. Nos hacemos cargo del problema hasta resolverlo.
- Correo electrónico: support@qualgear.com
- Horario: Mon–Fri, 9am–5pm CT
- Teléfono: +1-972-423-5015
Envío el mismo día
Los pedidos de artículos en stock realizados antes de la hora límite se envían el mismo día laborable.
- Hora límite: 2:00 pm CT, Mon–Fri
- Despacho el mismo día para artículos en stock
- El tiempo de tránsito del transportista no está garantizado
Los pedidos de fin de semana y festivos se envían el siguiente día laborable; se excluyen los artículos agotados.
Detalles de envíoPago seguro
El pago está cifrado de extremo a extremo. Nunca vemos ni almacenamos tu número de tarjeta completo.
- Conexión cifrada con TLS
- Procesamiento PCI-DSS
- Datos de tarjeta tokenizados, nunca en nuestros servidores
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
View key specifications Open the full fit checkerCheck this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
| Performance / Capacity | |
| Max projector weight | 30 lb / 13.6 kg |
| Tilt | 0-60 degrees |
| Swivel | 360 degrees |
| Pitch | +/-30 degrees |
| Roll | +/-20 degrees |
| Horizontal shift | 1 in / 2.5 cm |
| Dimensions & Weight | |
| Profile (ceiling distance) | 6 in / 15.2 cm |
| Compatibility / Requirements | |
| Mounting hole range | 6.6-16 in / 16.8-40.6 cm |
| Projector types | Most DLP and LCD projectors |
| Ceilings supported | Wood studs or beams, solid concrete, or brick |
| Materials & Finish | |
| Material | Cold-rolled steel |
| Color | White |
| Care / Installation | |
| Projector release | Snap-on / snap-off quick release |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
Snap-on quick release holds 30 lb / 13.6 kg at 6 in / 15.2 cm from the ceiling.
Keep the projector tight to a white ceiling and out of the room's sightline. The QualGear PRB-717-WHT low profile universal projector ceiling mount holds projectors up to 30 lb / 13.6 kg just 6 in / 15.2 cm from the ceiling and fits units with mounting holes spaced 6.6-16 in / 16.8-40.6 cm apart.
Aim the image with 0-60 degree tilt and 360 degree swivel, level it with +/-30 degree pitch and +/-20 degree roll, and finish alignment with 1 in / 2.5 cm of horizontal shift. The snap-on, snap-off design releases the projector from the mount for quick access.
Cold-rolled steel construction in white sits quietly against a white ceiling. Pairs with a QualGear HDMI cable and VT2-B-50-P reusable cable ties for a clean ceiling run; when the install calls for a telescopic column, step up to the QualGear Universal Telescopic Projector Ceiling Mount, White (QG-PM-002-WHT). Backed by a 1-year limited manufacturer's warranty, parts only, with a 30-day RMA and US-based phone support at +1-972-423-5015.
Low profile keeps the ceiling clean
Holds the projector just 6 in / 15.2 cm from the ceiling, so the install stays tight and unobtrusive.
Fits most projectors up to 30 lb
Universal design fits most DLP and LCD projectors up to 30 lb / 13.6 kg with mounting holes 6.6-16 in / 16.8-40.6 cm apart.
Aims the image on four axes
Tilt 0-60 degrees, swivel 360 degrees, pitch +/-30 degrees, and roll +/-20 degrees line the image up with the screen.
Horizontal shift for final alignment
1 in / 2.5 cm of horizontal shift fine-tunes lens position for final image alignment on the bracket.
Quick release for easy access
Snap-on, snap-off design releases the projector from the mount whenever you need quick access.
Cold-rolled steel in white
Cold-rolled steel construction carries the load, and the white finish blends into a white ceiling.
Reviews
Ratings from where we sell
Estas valoraciones se recopilaron directamente de los marketplaces enlazados a continuación, no del sistema de reseñas propio de QualGear.
4.5 de 5 según 2005 valoraciones de marketplaces
-
Amazon.com2001 valoracionesa fecha de 2026-10-06Ver el anuncio en Amazon.com (se abre en una pestaña nueva)
-
Home Depot4 valoracionesa fecha de 2026-10-06Ver el anuncio en Home Depot (se abre en una pestaña nueva)
Write a review
Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.
Complete your setup
QualGear Premium Certified High Speed HDMI 2.0b Cable with Ethernet, 4K, Black, QG-PCBL-HD20
- Version HDMI 2.0b with ethernet
- Bandwidth Up to 18 Gbps
- Resolution 4K at 50/60 Hz (2160p), HDR, BT.2020
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
Compare other options
QualGear Projector Ceiling Mount Kit, Single Joist, White, QG-KIT-CA-3IN-W
- Ceiling types Single wood joist, wood beam, wood stud, and concrete ceilings
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-CA-W single joist ceiling adapter
QualGear Drop Ceiling Projector Mount Kit, 2'x2', White, QG-KIT-S2-3IN-W
- Ceiling types Drop or suspended ceilings (standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems)
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-SCA2-W suspended ceiling adapter
QualGear Sloped Ceiling Projector Mount Kit, White, QG-KIT-VA-3IN-W
- Ceiling types Cathedral or vaulted ceilings
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-VCA-W vaulted ceiling adapter



