QualGear Projector Wall Mount with Fine Tune Adjustments, White, QG-PM-FT1-WHT
SKU QG-PM-FT1-WHT
Los pedidos realizados antes de 2:00 pm CT se envían el mismo día laborable.
No se pudo cargar la disponibilidad de retiro
Asistencia en EE. UU.
Personas reales en Anna, Texas — no un centro de llamadas en el extranjero. Nos hacemos cargo del problema hasta resolverlo.
- Correo electrónico: support@qualgear.com
- Horario: Mon–Fri, 9am–5pm CT
- Teléfono: +1-972-423-5015
Envío el mismo día
Los pedidos de artículos en stock realizados antes de la hora límite se envían el mismo día laborable.
- Hora límite: 2:00 pm CT, Mon–Fri
- Despacho el mismo día para artículos en stock
- El tiempo de tránsito del transportista no está garantizado
Los pedidos de fin de semana y festivos se envían el siguiente día laborable; se excluyen los artículos agotados.
Detalles de envíoPago seguro
El pago está cifrado de extremo a extremo. Nunca vemos ni almacenamos tu número de tarjeta completo.
- Conexión cifrada con TLS
- Procesamiento PCI-DSS
- Datos de tarjeta tokenizados, nunca en nuestros servidores
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
View key specifications Open the full fit checkerCheck this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
| Performance / Capacity | |
| Max projector weight | 33 lb / 15 kg |
| Mount type | Projector wall mount, telescopic extension arm |
| Fine-tune dials | Vertical tilt +/-5 degrees, horizontal roll +/-5 degrees, horizontal rotation +/-5 degrees (tool-less) |
| Dimensions & Weight | |
| Arm reach (front/ | 14.96-25.98 in / 380-660 mm |
| Left/ | 0-3.54 in / 0-90 mm |
| Compatibility / Requirements | |
| Throw support | Regular front throw and short throw |
| Projector compatibility | Most DLP and LCD projectors |
| Materials & Finish | |
| Color | White |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015 |
Tool-less dials fine-adjust the image — for front throw or short throw setups.
Mount the projector on the wall — where a ceiling install is not practical — and still get a squared image. This projector wall mount carries projectors up to 33 lb / 15 kg on a telescopic arm that reaches 14.96-25.98 in / 380-660 mm from the wall, for regular front throw and short throw projectors.
Three tool-less dials fine-tune vertical tilt, horizontal roll, and horizontal rotation, +/-5 degrees each, so alignment happens at the mount after the hardware is up. The head also shifts left/right up to 3.54 in / 90 mm to land the image without remounting. It suits most DLP and LCD projectors.
Five axes of adjustment in a stable wall-mounted position set this mount apart, and the white finish blends with most walls. Pairs with a QualGear high speed HDMI cable and reusable cable ties for a clean wall run. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Carries projectors up to 33 lb
Supports projectors up to 33 lb / 15 kg in a stable wall-mounted position.
Tool-less dials fine-tune the image
Vertical tilt, horizontal roll, and horizontal rotation each fine-adjust +/-5 degrees, with no tools needed.
Telescopic arm sets the distance
Arm reach adjusts from 14.96-25.98 in / 380-660 mm from the wall, for regular front throw and short throw projectors.
Shifts to land the image
Slides left/right up to 3.54 in / 90 mm for final alignment without remounting.
Works where ceilings don't
A wall position keeps six-axis adjustment where a ceiling install is not practical.
White finish stays quiet
White finish blends with most walls.
Reviews
No reviews yet.
Write a review
Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.
Complete your setup
QualGear Premium Certified High Speed HDMI 2.0b Cable with Ethernet, 4K, Black, QG-PCBL-HD20
- Version HDMI 2.0b with ethernet
- Bandwidth Up to 18 Gbps
- Resolution 4K at 50/60 Hz (2160p), HDR, BT.2020
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
Compare other options
QualGear Projector Ceiling Mount Kit, Single Joist, White, QG-KIT-CA-3IN-W
- Ceiling types Single wood joist, wood beam, wood stud, and concrete ceilings
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-CA-W single joist ceiling adapter
QualGear Drop Ceiling Projector Mount Kit, 2'x2', White, QG-KIT-S2-3IN-W
- Ceiling types Drop or suspended ceilings (standard 2 ft x 2 ft / 61 x 61 cm or 2 ft x 4 ft / 61 x 122 cm grid systems)
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-SCA2-W suspended ceiling adapter
QualGear Sloped Ceiling Projector Mount Kit, White, QG-KIT-VA-3IN-W
- Ceiling types Cathedral or vaulted ceilings
- Included mount QG-PRO-PM-50-W
- Included adapter QG-PRO-PM-VCA-W vaulted ceiling adapter