QualGear 23-42 in Articulating TV Wall Mount, Ultra Low Profile, Black, QG-TM-020-BLK
SKU: QG-TM-020-BLK
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 200×200. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Max load | 66 lb / 30 kg |
| TV size range | 23-42 in / 58.4-106.7 cm |
| Mount type | Full motion, articulating |
| Swivel | 90 degrees left/right |
| Tilt | +5 to -15 degrees |
| Level adjustment | 3 degrees clockwise/counterclockwise |
| Compatibility / Requirements | |
| Wall types | Wood studs, concrete, brick |
| Dimensions & Weight | |
| Retracted profile | 1.8 in / 4.6 cm |
| Materials & Finish | |
| Color | Black |
| Care / Installation | |
| What's included | Wall mount, bubble level, decorative covers, pre-sorted mounting hardware, installation manual |
| Cable management | Integrated in the pre-assembled arm |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015; 30-day RMA |
Swivels 90 degrees and tilts to cut glare, then tucks to 1.8 in / 4.6 cm.
Off-center seating still gets a straight-on picture — this full motion articulating mount swivels the screen 90 degrees left or right toward whoever is watching. Fit is set by VESA pattern and TV weight: it suits displays with 75x75, 100x100, 200x100, or 200x200 mm patterns weighing up to 66 lb / 30 kg, typically 23-42 in / 58.4-106.7 cm screens.
Tilt runs +5 to -15 degrees, and the ultra low profile arm retracts the TV to 1.8 in / 4.6 cm from the wall when pushed back. After hanging, post-installation leveling rotates the screen 3 degrees clockwise or counterclockwise, and the included bubble level confirms it is straight without new holes. In the box: wall mount, bubble level, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.
The arm arrives pre-assembled with integrated cable management and decorative covers. A QualGear high speed HDMI cable and reusable cable ties keep the moving arm's cabling tidy; for 23-55 in / 58.4-139.7 cm screens, the QG-TM-A-012 steps up the size range. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Swivels 90 degrees toward the seating
Swivels the screen 90 degrees left or right, so off-center couches and seats get a straight-on picture.
Tilts to the viewing angle
Tilt range of +5 to -15 degrees angles the screen down or up to match where you sit.
Retracts to 1.8 in from the wall
The ultra low profile arm folds the TV back to 1.8 in / 4.6 cm, close to a fixed-mount look between viewings.
Level the TV after it hangs
Post-installation leveling rotates the screen 3 degrees clockwise or counterclockwise; the included bubble level confirms alignment without re-drilling.
Pre-assembled arm, pre-sorted hardware
The arm ships pre-assembled with integrated cable management, and hardware for wood studs, concrete, and brick arrives pre-sorted by wall type.
Documentation
Reviews
Ratings from where we sell
These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.
4.2 out of 5 across 122 marketplace ratings
-
Amazon.ca61 ratingsLast checked 2026-07-29View listing on Amazon.ca (opens in a new tab)
-
Amazon.com61 ratingsLast checked 2026-07-26View listing on Amazon.com (opens in a new tab)
Complete your setup
QualGear Premium Certified High Speed HDMI 2.0b Cable with Ethernet, 4K, Black
- Version HDMI 2.0b with ethernet
- Bandwidth Up to 18 Gbps
- Resolution 4K at 50/60 Hz (2160p), HDR, BT.2020
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
QualGear Multipurpose Adhesive Cable Clip Holders, Black, 10 Pack, CCH-B-10-B
- Type Adhesive cable clip holder
- Quantity 10
- Holder material Thermoplastic polyurethane (TPU)
Compare other options
QualGear 23-55 in Articulating TV Wall Mount, Ultra Slim, Black, QG-TM-A-012
- Max load 77 lb / 35 kg
- TV size range 23-55 in / 58.4-139.7 cm
- Mount type Full motion, articulating (three pivot points)