Star Ergonomics Dual Monitor Electric Sit-Stand Workstation, Black, Keyboard Tray, SE05E2WB
SKU: SE05E2WB
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 100×100. Not sure of your TV's pattern? Check your TV's manual.
| Dimensions & Weight | |
| Work-surface height range | 1.4-21.1 in / 35-535 mm (travel above the desk) |
| Monitor column height | 27.6-47.2 in / 70.1-119.9 cm |
| Base footprint | 19 x 15.7 in / 48.3 x 39.9 cm |
| Keyboard tray | 28.3 W x 18.9 D in / 71.9 W x 48.0 D cm |
| Support assembly width | 33.5 in / 85.1 cm with no monitors attached; installed width is greater once monitors are fitted |
| Center support column | 3.6 in / 9.1 cm wide |
| Performance / Capacity | |
| Type | Electric standing desk converter, dual monitor |
| Lift mechanism | Single-motor electric |
| Controls | Press controller |
| Load capacity | 44 lb / 20 kg overall, covering both monitors and the keyboard tray together |
| Compatibility / Requirements | |
| Monitor support | Two monitors, 13-32 in / 33-81 cm. Each monitor mounts to its own VESA plate, and each plate takes the VESA 75 x 75 and 100 x 100 patterns |
| Monitor mounting | Both monitors mount on a single shared support post |
| Mounting hole span | The two VESA plates slide along the bar. Measured centre of one plate to centre of the other, they sit between 4 in / 10.2 cm and 30.5 in / 77.5 cm apart. This is the distance between the plates, not the hole spacing on either monitor |
| Monitor clearance | Set by how far apart the two plates can sit, not by screen width. Each monitor hangs on its own plate, so the pair fits when the plates can be positioned far enough apart for the panels to clear each other, up to the 30.5 in / 77.5 cm maximum centre-to-centre |
| Placement | Fits on most existing desks |
| Desk clearance | Base requires 19 x 15.7 in / 48.3 x 39.9 cm of desk; allow for the keyboard tray at 28.3 W x 18.9 D in / 71.9 W x 48.0 D cm |
| Compatibility note | Monitor fit is determined by VESA pattern and weight capacity, not diagonal screen size alone |
| Materials & Finish | |
| Color | Black |
| Care / Installation | |
| Manual | Installation manual available for download |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
Two monitors, keyboard, and work surface rise together at a button press.
Run a two-screen setup without replacing your desk. This dual monitor electric sit-stand workstation sits on an existing desk and lifts both screens, the keyboard tray, and the work surface through a 1.4-21.1 in / 35-535 mm motorized height range at the press of a button.
Side-by-side holders carry two 13-32 in / 33-81 cm monitors, tilt freely, and rotate 360 degrees for landscape or portrait viewing. The keyboard tray keeps typing at one level whether you sit or stand, a front slot holds most tablets and phones, and cable management keeps cords organized while the quiet single-motor lift moves the loaded surface in a smooth, stable motion.
Monitor fit is determined by the VESA mounting pattern — 75x75 or 100x100 mm — and weight capacity rather than diagonal screen size alone. When you are ready for a full-size sit-stand desk, the QualGear Smart Standing Desk frame is in the catalog; it requires a tabletop you supply. An installation manual is available for download, and the workstation is backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Two screens rise with you
Side-by-side holders carry two 13-32 in / 33-81 cm monitors, so the whole setup moves between sitting and standing heights together.
Sit or stand at a button press
The press controller drives the surface through a 1.4-21.1 in / 35-535 mm motorized height range in one smooth motion.
Holders tilt and rotate 360 degrees
Each monitor holder tilts freely and rotates 360 degrees, so either screen can run landscape or portrait.
Quiet motor lifts the loaded surface
The quiet single-motor electric lift raises the loaded work surface in a smooth, stable motion.
Keyboard tray keeps typing level
The keyboard tray holds keyboard and mouse at the same working level through every height change.
Organized surface, tidy cords
A front slot holds most tablets and phones, and built-in cable management keeps cords organized as the surface moves.
Documentation
Reviews
No reviews yet.
Compare other options
QualGear Smart Standing Desk Frame, Dual Motor Electric, Tabletop Not Included, QG-NE01
- Height range 25-50 in / 63.5-127 cm
- Width range 42-68 in / 106.7-172.7 cm
- Type Smart standing desk frame, dual motor