QualGear 37-70 in Fixed Wire Rope TV Wall Mount, Stainless Steel, QG-TM-001
SKU: QG-TM-001
Most in-stock orders placed by 2:00 pm CT on business days are processed the same day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day processing
Most in-stock orders placed by the cutoff on business days are processed the same day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day processing on most in-stock orders
- Transit set by the carrier
Weekend and holiday orders are processed the next business day. Need it urgently? Call 972-423-5015 before you order so we can confirm stock and same-day shipping.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
Looking up a TV? The TV wall mount finder checks your model's VESA pattern and weight for you.
Find my TV mountCheck by hand instead
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
View key specifications Open the full fit checkerCheck this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when its mounting pattern and weight are within the published specifications. A screen-size range is a recommendation, not a limit.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its maximum 800×800. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Max load | 110 lb / 50 kg |
| Recommended screen size | 37-70 in / 94-178 cm |
| Mount type | Fixed (wire rope, picture-hanging style) |
| Compatibility / Requirements | |
| VESA (concrete/ | 100x100, 200x200, 400x400, 600x600, 800x800 mm |
| VESA (wood studs) | 400x400 (not compatible at 24 in / 600 mm stud spacing), 600x600, 800x800 mm |
| VESA (drywall, toggle bolts) | 100x100, 200x200, 400x400, 600x600, 800x800 mm (toggle bolts not included; see the drywall note) |
| Wall types | Wood studs (16 in / 40.6 cm or 24 in / 61 cm), concrete, brick; drywall with toggle bolts (not included) as an alternative |
| Drywall note | Wood studs, or concrete or solid brick, are the recommended installations, and the hardware for them is included. Drywall installation with toggle bolts (not included) is an alternative when a wood stud is not available where the wall plates must go, or when your TV's VESA pattern is not supported on wood studs. Each toggle bolt must support at least three times the weight of your TV or monitor. QualGear has not tested this mount on drywall, and installation on drywall is at your own risk: the TV and mount must stay within both the mount's 110 lb / 50 kg rating and the toggle-bolt manufacturer's ratings for your wall thickness and the number of toggle bolts used — use the lower limit. See step 1c in the installation manual. |
| Dimensions & Weight | |
| Profile (wall distance) | under 0.6 in / 1.5 cm |
| Materials & Finish | |
| Color | Stainless steel |
| Care / Installation | |
| In the box | Wall mount, pre-sorted mounting hardware for studs, concrete, and brick, installation manual |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015 |
Hangs flat or curved screens picture-close — under 0.6 in / 1.5 cm off the wall.
Hang a TV the way you'd hang a picture: the wire rope design sets flat or curved screens less than 0.6 in / 1.5 cm from the wall, carries up to 110 lb / 50 kg, and is recommended for 37-70 in / 94-178 cm TVs. Fit is decided by VESA pattern and TV weight first — the supported VESA patterns depend on wall type and are listed in the specifications below, and the size range is the guide.
Two included kickstands hold the TV away from the wall for cable hookup, and the hardware pack ships pre-sorted for wood studs (16 in / 40.6 cm and 24 in / 61 cm spacing), concrete, and brick. In the box: wall mount, pre-sorted mounting hardware for studs, concrete, and brick, and the installation manual.
Because the mount is fixed, the screen sits closer to the wall than a moving arm allows; if you need more capacity, the QG-TM-030-BLK heavy duty fixed mount is the step up. Pairs with a QualGear HDMI cable and cable clips for a clean hookup behind the TV. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Hangs like a picture frame
The picture-hanging wire rope design sets flat or curved screens less than 0.6 in / 1.5 cm from the wall.
Holds up to 110 lb
Holds TVs up to 110 lb / 50 kg; recommended for 37-70 in / 94-178 cm screens, including 55 in / 140 cm and 65 in / 165 cm models.
VESA coverage matched to wall type
Concrete or brick: 100x100 to 800x800 mm. Wood studs: 400x400 mm and up (not 400x400 on 24 in / 600 mm studs). Drywall with toggle bolts: an alternative.
Kickstands ease cable hookup
Two included kickstands hold the TV away from the wall so you can connect cables after the screen is hung.
Pre-sorted hardware for three wall types
Hardware ships pre-sorted for wood studs (16 in / 40.6 cm or 24 in / 61 cm spacing), concrete, and brick — fasteners for each wall type included.
Reviews
Ratings from where we sell
These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.
4.4 out of 5 across 1932 marketplace ratings
-
Amazon.ca949 ratingsLast checked 2026-10-06View listing on Amazon.ca (opens in a new tab)
-
Amazon.com977 ratingsLast checked 2026-10-06View listing on Amazon.com (opens in a new tab)
-
Home Depot6 ratingsLast checked 2026-10-06View listing on Home Depot (opens in a new tab)
Write a review
Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.
Complete your setup
QualGear Premium Certified High Speed HDMI 2.0b Cable with Ethernet, 4K, Black, QG-PCBL-HD20
- Version HDMI 2.0b with ethernet
- Bandwidth Up to 18 Gbps
- Resolution 4K at 50/60 Hz (2160p), HDR, BT.2020
QualGear Multipurpose Adhesive Cable Clip Holders, Black, 10 Pack, CCH-B-10-B
- Type Adhesive cable clip holder
- Quantity 10
- Holder material Thermoplastic polyurethane (TPU)
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
Compare other options
QualGear 37-70 in UL Listed Heavy Duty Fixed TV Wall Mount, Black, QG-TM-030-BLK
- Max load 88 lb / 40 kg
- Recommended screen size 37-70 in / 94-178 cm (flat and curved)
- Security Locking bar, padlock not included