QualGear Universal Speaker Wall Mounts, Pair of 2, 7.7 lb / 3.5 kg, Black, QG-SB-002-BLK

SKU: QG-SB-002-BLK· UL Listed

Regular price $16.95
Sale price $16.95 Regular price
30-day returns — send it back within 30 days of the date of purchase.
1-year limited manufacturer's warranty, parts only
Installation manual PDF Will it fit? Check before you buy

Will it fit?

Check the fit before you buy.

  1. Find your equipment's numbers

    For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.

  2. Compare against this mount's Key Specifications

    Check this mount's Key Specifications for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when its mounting pattern and weight are within the published specifications. A screen-size range is a recommendation, not a limit.

    View key specifications Open the full fit checker

Always confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.

Key Specifications

7.7 lb / 3.5 kg per mount 20 degrees up/down 70 degrees left/right Single or double thread
Full technical specifications
Performance / Capacity
Max load7.7 lb / 3.5 kg per mount
Tilt20 degrees up/down
Swivel70 degrees left/right
Compatibility / Requirements
Speaker attachmentSingle or double thread
Dimensions & Weight
Wall distance2.5 in / 64 mm
Mount weight0.6 lb / 0.27 kg
Materials & Finish
MaterialHigh-density plastic
ColorBlack
Care / Installation
IncludedPair of 2 brackets
Wall platesSlide-in
AdjustmentTool-free adjusting knob
Warranty & Support
Warranty1-year limited manufacturer's warranty, parts only
UL ListedYes (this model)

A pair of tilt/swivel brackets that aim each speaker at the listening area.

Aim each speaker at the seat, not just at the room. The QualGear QG-SB-002-BLK is a pair of universal speaker wall mounts — two brackets, each holding a speaker up to 7.7 lb / 3.5 kg on a spherical joint that tilts 20 degrees up or down and swivels 70 degrees left or right.

An adjusting knob angles the speaker without tools, and slide-in wall plates make installation quick. The low-profile design keeps each speaker 2.5 in / 64 mm from the wall, and the mounts install on the single thread or one of the double threads of the speaker.

High-density plastic construction keeps each mount light — 0.6 lb / 0.27 kg — in a black finish that stays out of the way. UL Listed for safety. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.

Two mounts, one for each speaker

Sold as a pair of 2 wall mount brackets, covering both speakers in one purchase.

Each holds up to 7.7 lb

Each mount carries a speaker up to 7.7 lb / 3.5 kg.

Tilts and swivels to aim sound

The spherical joint tilts 20 degrees up or down and swivels 70 degrees left or right to aim sound at the listening area.

Tool-free aiming with the knob

An adjusting knob angles the speaker without tools, so you can fine-tune after mounting.

Low profile, close to the wall

Keeps the speaker 2.5 in / 64 mm from the wall for a tidy install.

Slide-in plates for quick installs

Slide-in wall plates make hanging each speaker quick once the plate is on the wall.

Reviews

Ratings from where we sell

These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.

4.4 out of 5 across 741 marketplace ratings

Write a review

Reviews are open to verified purchasers. We match your email or order number to a past order before publishing.

Your rating

We publish your first name and last initial only.

Used to verify your purchase. Never published.

Speeds up matching your review to your order — found on your order confirmation email.