QualGear 13-27 in Articulating TV Wall Mount, Black, QG-TM-022-BLK
SKU: QG-TM-022-BLK
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 100×100. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Max load | 44 lb / 20 kg |
| TV size range | 13-27 in / 33-68.6 cm |
| Mount type | Full motion, articulating |
| Swivel | 90 degrees left/right |
| Tilt | +5 to -15 degrees |
| Rotation | 360 degrees |
| Compatibility / Requirements | |
| Wall types | Wood studs, concrete, brick |
| Dimensions & Weight | |
| Retracted profile | 2.1 in / 5.3 cm |
| Materials & Finish | |
| Color | Black |
| Care / Installation | |
| What's included | Wall mount, decorative covers, pre-sorted mounting hardware, installation manual |
| Cable management | Integrated in the pre-assembled arm |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015; 30-day RMA |
Swivels, tilts, and rotates 360 degrees for portrait or landscape viewing.
Small screens rarely hang exactly where the viewer sits — this articulating mount swivels, tilts, and rotates the display to meet them. Fit is set by VESA pattern and TV weight: it suits displays with 75x75 or 100x100 mm patterns weighing up to 44 lb / 20 kg, typically 13-27 in / 33-68.6 cm screens.
The arm swivels 90 degrees left or right and tilts +5 to -15 degrees, and the screen rotates a full 360 degrees — portrait or landscape is a hand movement, not a re-install. Pushed back, the TV sits 2.1 in / 5.3 cm from the wall. In the box: wall mount, decorative covers, pre-sorted mounting hardware for wood studs, concrete, and brick, and the installation manual.
The arm arrives pre-assembled with integrated cable management and decorative covers. A QualGear high speed HDMI cable and cable clip holders keep the hookup clean behind the screen; for 23-42 in / 58.4-106.7 cm TVs, the QG-TM-020-BLK steps up the size range. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Rotates 360 for portrait or landscape
The screen rotates a full 360 degrees, switching between portrait and landscape without unmounting the TV.
Swivels 90 degrees toward the viewer
Swivels 90 degrees left or right, so off-center seats get a straight-on picture from a small screen.
Tilts to the viewing angle
Tilt range of +5 to -15 degrees angles the screen down or up to match where you sit.
Slim 2.1 in retracted profile
Retracts the TV to 2.1 in / 5.3 cm from the wall when pushed back.
Pre-assembled arm, pre-sorted hardware
The arm ships pre-assembled with integrated cable management; hardware for wood studs, concrete, and brick arrives pre-sorted by wall type.
Documentation
Reviews
No reviews yet.
Complete your setup
QualGear Premium Certified High Speed HDMI 2.0b Cable with Ethernet, 4K, Black
- Version HDMI 2.0b with ethernet
- Bandwidth Up to 18 Gbps
- Resolution 4K at 50/60 Hz (2160p), HDR, BT.2020
QualGear Multipurpose Adhesive Cable Clip Holders, Black, 10 Pack, CCH-B-10-B
- Type Adhesive cable clip holder
- Quantity 10
- Holder material Thermoplastic polyurethane (TPU)
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
Compare other options
QualGear 23-42 in Articulating TV Wall Mount, Ultra Low Profile, Black, QG-TM-020-BLK
- Max load 66 lb / 30 kg
- TV size range 23-42 in / 58.4-106.7 cm
- Mount type Full motion, articulating