QualGear 3-Way Articulating Dual Monitor Desk Mount, 13-32 In, Silver, QG-DM-02-016
SKU: QG-DM-02-016
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 100×100. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Monitors supported | 2 |
| Load capacity | 17.6 lb / 8 kg per arm |
| Screen size range | 13-32 in / 33-81 cm per monitor (guide; fit is set by VESA pattern and weight) |
| Rotation | 360 deg |
| Tilt | 15 deg, any direction (ball joint) |
| Swivel | 90 deg left / right |
| Arm type | Fixed articulating, 3-way |
| Height adjustment | Telescopic, tool-free |
| Compatibility / Requirements | |
| Mounting | Desk clamp or grommet |
| Cable management | Integrated (cable clips included) |
| Materials & Finish | |
| Material | Die-cast aluminum |
| Color | Silver |
| Dimensions & Weight | |
| Assembled dimensions | 18 x 9.5 x 8.4 in / 45.7 x 24.1 x 21.3 cm |
| Care / Installation | |
| What's included | Dual monitor desk mount, pre-sorted hardware pack, cable clips, installation manual |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
Holds two screens on one base — each arm rated 17.6 lb / 8 kg, tool-free height.
A 3-way articulating desk mount that puts two monitors at working height on a single clamp or grommet base. Each die-cast aluminum arm fits VESA 75x75 to 100x100 mm monitors within its 17.6 lb / 8 kg rating — the 13-32 in / 33-81 cm per-monitor range is a guide, not the limit.
Each arm rotates 360 deg for landscape or portrait, tilts 15 deg in any direction on a ball joint, and swivels 90 deg left or right, while the telescopic column sets both screens' height without tools. In the box: the dual mount, a pre-sorted hardware pack, cable clips, and an installation manual.
Pairs with the QualGear Smart Standing Desk or a Star Ergonomics sit-stand frame to finish a dual-screen workstation. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Two monitors, one desk footprint
Holds two flat-panel monitors on a single clamp or grommet base, each arm rated to 17.6 lb / 8 kg.
Portrait or landscape per arm
Each arm rotates 360 deg independently, so one screen can stand in portrait while the other stays widescreen.
Fits VESA 75x75 to 100x100 mm
Compatibility is set by the VESA pattern and per-arm weight rating, not the diagonal — 13-32 in / 33-81 cm per monitor is a guide.
Adjusts height without tools
Telescopic height adjustment raises both screens to eye level tool-free, and ball joints tilt 15 deg in any direction.
Cable clips in the box
Included cable clips gather both monitors' cords, and the pre-sorted hardware pack covers clamp and grommet installs.
What's in the box
Documentation
Reviews
Ratings from where we sell
These ratings were collected directly from the marketplaces linked below, not from QualGear's own review pipeline.
4.3 out of 5 across 211 marketplace ratings
-
Amazon.ca97 ratingsLast checked 2026-07-29View listing on Amazon.ca (opens in a new tab)
-
Amazon.com114 ratingsLast checked 2026-07-29View listing on Amazon.com (opens in a new tab)
Complete your setup
QualGear Smart Standing Desk Frame, Dual Motor Electric, Tabletop Not Included, QG-NE01
- Height range 25-50 in / 63.5-127 cm
- Width range 42-68 in / 106.7-172.7 cm
- Type Smart standing desk frame, dual motor
Star Ergonomics 3-Stage Dual Motor Electric Sit-Stand Desk Frame, White, Tabletop Not Included, SE07E1FW
- Height range 24.4-50.4 in / 620-1280 mm
- Width (frame) 39.4-66.9 in / 1000-1700 mm
- Depth (frame) 23.6 in / 600 mm
Star Ergonomics 3-Stage Reverse Dual Motor Electric Sit-Stand Desk Frame, Black, Tabletop Not Included, SE06E1FB
- Height range 24.4-50.4 in / 620-1280 mm
- Width (frame) 39.4-66.9 in / 1000-1700 mm
- Depth (frame) 23.6 in / 600 mm