QualGear 13-27 in Full Motion TV Wall Mount, Low Profile, Black, QG-TM-007-BLK
SKU: QG-TM-007-BLK
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 100×100. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Max load | 66 lb / 30 kg |
| TV size range | 13-27 in / 33-69 cm |
| Mount type | Full motion (swivel arm + tilting VESA plate) |
| Compatibility / Requirements | |
| Wall types | Wood studs, concrete, brick |
| Dimensions & Weight | |
| Profile (wall distance) | 1.9 in / 4.8 cm |
| Materials & Finish | |
| Color | Black |
| Care / Installation | |
| In the box | Wall mount, pre-sorted mounting hardware, installation manual |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
| Support | US-based phone support, +1-972-423-5015 |
Puts a kitchen, RV, or small-room screen on a swivel arm with a tilting plate.
Small screens go where counters, cabinets, and bunks leave little room. This full motion mount puts a 13-27 in / 33-69 cm TV on a swivel arm with a tilting VESA plate, holds up to 66 lb / 30 kg, and sits 1.9 in / 4.8 cm from the wall. Fit check: VESA 75x75 or 100x100 mm and TV weight first; the size range is the guide.
The arm swivels and the plate tilts to angle the screen toward a kitchen stool, an RV bunk, or a small-room seat, and the low profile keeps the TV close to the wall when pushed back. Hardware ships pre-sorted for wood studs, concrete, and brick. In the box: wall mount, pre-sorted mounting hardware, and the installation manual.
When the next TV is bigger, the QG-TM-020-BLK ultra low profile mount steps up to 23-42 in / 58-107 cm screens. Pairs with a QualGear HDMI cable and cable clips for a clean hookup behind the TV. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Made for small-screen spots
Sized for 13-27 in / 33-69 cm TVs — the small screens in kitchens, RVs, and small rooms.
Swivels and tilts to the seat
The swivel arm and tilting VESA plate angle the screen toward wherever you're sitting.
Holds up to 66 lb
Rated for TVs up to 66 lb / 30 kg on VESA patterns 75x75 and 100x100 mm.
Low 1.9 in profile
Places the TV 1.9 in / 4.8 cm from the wall when the arm is pushed back.
Pre-sorted hardware for three wall types
Hardware ships pre-sorted for wood studs, concrete, and brick, so installation starts with the right fasteners.
Documentation
Reviews
No reviews yet.
Complete your setup
QualGear Premium Certified High Speed HDMI 2.0b Cable with Ethernet, 4K, Black
- Version HDMI 2.0b with ethernet
- Bandwidth Up to 18 Gbps
- Resolution 4K at 50/60 Hz (2160p), HDR, BT.2020
QualGear Multipurpose Adhesive Cable Clip Holders, Black, 10 Pack, CCH-B-10-B
- Type Adhesive cable clip holder
- Quantity 10
- Holder material Thermoplastic polyurethane (TPU)
QualGear Reusable Cable Ties, 1/2 x 6 in, Black, 50 Pack, VT2-B-50-P
- Width 1/2 in / 12 mm
- Length 6 in / 150 mm
- Quantity 50
Compare other options
QualGear 23-42 in Articulating TV Wall Mount, Ultra Low Profile, Black, QG-TM-020-BLK
- Max load 66 lb / 30 kg
- TV size range 23-42 in / 58.4-106.7 cm
- Mount type Full motion, articulating