QualGear 1.5 in NPT TV Ceiling Mount for 32-55 in TVs, VESA 400x400, QG-PRO-TVCM
SKU: QG-PRO-TVCM
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 400×400. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Fit screen size | 32-55 in / 81.3-139.7 cm |
| Rated load | 110 lb / 50 kg |
| Tilt | +5 to -12 degrees |
| Rotation | 360 degrees around pole |
| Screen leveling | +/-5 degrees |
| Compatibility / Requirements | |
| Pipe fitting | 1.5-in NPT (ceiling plate and pipe sold separately) |
| Cable management | Integrated, with ceiling mount covers |
| Dimensions & Weight | |
| Profile | 4.1 in / 103 mm |
| Open-position size | 4.1 x 21 x 17.3 in / 103 x 534 x 440 mm |
| Materials & Finish | |
| Material | Aluminum, steel, powder coated |
| Care / Installation | |
| What's included | Ceiling mount head, ceiling mount covers, installation hardware |
| Warranty & Support | |
| Warranty | 5-year limited manufacturer's warranty, parts only |
Threads onto any 1.5-in NPT pipe drop to hang a 110 lb / 50 kg display.
Hang a 32-55 in / 81.3-139.7 cm display from the ceiling of a store, lobby, or restaurant and aim it exactly where eyes go. This Pro-AV ceiling mount head threads onto any 1.5-in NPT pipe, ceiling plate, or extension tube and carries displays up to 110 lb / 50 kg on VESA patterns from 200x200 to 400x400 mm.
Once the display hangs, the head does the aiming: tilt runs +5 to -12 degrees, the mount rotates 360 degrees around the pole, and a +/-5 degree screen-leveling adjustment squares the picture after installation. Integrated cable management and ceiling mount covers keep the drop tidy at a 4.1 in / 103 mm profile. In the box: ceiling mount head, ceiling mount covers, and installation hardware — the 1.5-in NPT ceiling plate and pipe are sold separately.
The head completes QualGear's Pro-AV system — pair it with the 1.5-in NPT threaded extension pipe and a flat, sloped, or truss ceiling adapter, plus the NPT pipe connector for longer drops. Backed by a 5-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Threads onto standard 1.5 in NPT pipe
Standard 1.5-in NPT threading fits any Pro-AV ceiling plate, pipe, or extension tube, so the drop length matches the ceiling, not the mount.
Holds 110 lb / 50 kg displays
Carries 32-55 in / 81.3-139.7 cm commercial displays up to 110 lb / 50 kg on powder-coated aluminum and steel construction.
Aims after installation
Tilt +5 to -12 degrees, 360-degree rotation around the pole, and +/-5 degrees of screen leveling square the display without re-drilling anything.
VESA 200x200 to 400x400 mm
Adapts to six VESA patterns — 200x200, 300x200, 300x300, 400x200, 400x300, and 400x400 mm — covering most 32-55 in / 81.3-139.7 cm displays.
Cable management built into the drop
Integrated cable management and ceiling mount covers route the display's cabling inside a clean 4.1 in / 103 mm profile.
Reviews
No reviews yet.
Complete your setup
QualGear Pro-AV 1.5 in NPT Projector Mount Extension Pipe, QG-PRO-PM
- Length options 1.5 in / 3.8 cm, 3 in / 7.6 cm, 6 in / 15.2 cm, 12 in / 30.5 cm, 24 in / 61 cm, 36 in / 91.4 cm
- Max weight capacity 800 lb / 363 kg
- Thread standard 1.5-in NPT
QualGear Pro-AV Flat Ceiling Adapter, Black, QG-PRO-PM-CA-B
- Load rating Up to 80 lb / 36 kg
- Interface 1.5-in NPT threaded pipe
- Mounting surface Wood joist, structural wood, structural concrete
QualGear Sloped Ceiling Adapter, Black, QG-PRO-PM-VCA-B
- Interface 1.5 in NPT threaded pipe
- Mounting surface Cathedral and vaulted ceilings
- Load rating Up to 300 lb / 136 kg
QualGear Pro-AV Truss Ceiling Adapter, QG-PRO-PM-TCA-B
- Interface 1.5 in NPT threaded pipe
- Mounting surface Round, square, or rectangular truss and I-beams up to 3 in / 76 mm wide by 3.5 in / 89 mm high
- Load rating Up to 400 lb / 181 kg