QualGear 3-Way Articulating Single Monitor Desk Mount, 13-32 In, Silver, QG-DM-01-016
SKU: QG-DM-01-016
Orders placed by 2:00 pm CT ship the same business day.
Couldn't load pickup availability
US-based support
Real people in Anna, Texas — not an overseas call center. We own the problem until it's fixed.
- Email: support@qualgear.com
- Hours: Mon–Fri, 9am–5pm CT
- Phone: +1-972-423-5015
Same-day shipping
In-stock orders placed by the cutoff ship the same business day.
- Cutoff: 2:00 pm CT, Mon–Fri
- Same-day dispatch on in-stock items
- Carrier transit time not guaranteed
Weekend and holiday orders ship the next business day; out-of-stock items are excluded.
Shipping informationSecure checkout
Payment is encrypted end to end. We never see or store your full card number.
- TLS-encrypted connection
- PCI-DSS processing
- Card data tokenized, never on our servers
Will it fit?
Check the fit before you buy.
-
Find your equipment's numbers
For a TV or monitor, that's its VESA mounting-hole pattern and weight without the stand. For a projector, that's its weight and mounting-hole spacing. Both are published in the manufacturer's manual or spec page for the exact model.
-
Compare against this mount's Key Specifications
Open the full fit checkerCheck the Key Specifications above for the supported VESA patterns and weight capacity (or hole spacing, for projector mounts). Your equipment fits when every number is within the published range — screen size alone is not enough.
Build your fit checklist
Enter the numbers from your equipment's manual. We restate them as the checks to run — nothing is looked up or stored.
Check that your TV is wider than the mount's wall plate. If the plate is wider than the TV, it will show on either side. This is about appearance, not safety — fit is decided by VESA pattern and weight.
Can't find these numbers, or your model isn't listed? Send us the model number and we'll confirm which mounts fit before you buy.
Ask tech supportAlways confirm your equipment's weight and mounting pattern in its manual before mounting — screen size alone does not determine fit.
Key Specifications
What is VESA?
VESA is the standard spacing of the four threaded holes on the back of your TV or monitor — measured in millimeters, width × height. A mount "fits" your TV when it supports that hole pattern.
Measure center-to-center between holes: left-to-right is the width, top-to-bottom is the height.
This mount supports every pattern shown above, up to its ma×imum 100×100. Not sure of your TV's pattern? Check your TV's manual.
| Performance / Capacity | |
| Monitors supported | 1 |
| Load capacity | 17.6 lb / 8 kg |
| Screen size range | 13-32 in / 33-81 cm (guide; fit is set by VESA pattern and weight) |
| Tilt | 15 deg, any direction (ball joint) |
| Swivel | 90 deg left / right |
| Arm type | Fixed articulating, 3-way |
| Height adjustment | Telescopic, tool-free |
| Compatibility / Requirements | |
| Mounting | Desk clamp or grommet |
| Cable management | Integrated |
| Materials & Finish | |
| Material | Die-cast aluminum |
| Color | Silver |
| Dimensions & Weight | |
| Assembled dimensions | 16 x 9.8 x 5 in / 40.6 x 24.9 x 12.7 cm |
| Care / Installation | |
| What's included | Single monitor desk mount, pre-sorted hardware pack, installation manual |
| Warranty & Support | |
| Warranty | 1-year limited manufacturer's warranty, parts only |
Lifts one screen off the desk — tool-free height, ball-joint tilt, 90 deg swivel
A 3-way articulating arm that lifts a single monitor off the desk and holds it at working height. It fits VESA 75x75 or 100x100 mm monitors within its 17.6 lb / 8 kg rating — the 13-32 in / 33-81 cm screen range is a guide, not the limit — on a die-cast aluminum arm in silver.
The ball joint tilts 15 deg in any direction, the arm swivels 90 deg left or right, and the telescopic column sets height without tools, so glare and neck angle get fixed at the desk. The base installs as a desk clamp or through a grommet, and integrated cable management keeps the cords gathered. In the box: the mount, a pre-sorted hardware pack, and an installation manual.
Step up to the QG-DM-01-023 spring-arm mount for counterbalanced fingertip movement, or to the QG-DM-02-016 dual mount for a second screen; it also pairs with the QualGear Smart Standing Desk and Star Ergonomics sit-stand frames. Backed by a 1-year limited manufacturer's warranty, parts only, a 30-day RMA, and US-based phone support at +1-972-423-5015.
Holds 17.6 lb / 8 kg steady
The die-cast aluminum arm is rated to 17.6 lb / 8 kg, so a single monitor sits steady through every adjustment.
Fits VESA 75x75 and 100x100 mm
Compatibility comes from the VESA pattern and the weight rating, not the screen diagonal — the 13-32 in / 33-81 cm range is a guide.
Adjusts height without tools
The telescopic column raises or lowers the screen tool-free, so eye level is set in seconds, not with a wrench.
Tilts and swivels at the desk
The ball joint tilts 15 deg in any direction and the arm swivels 90 deg left or right to cut glare and share the screen.
Clamps or bolts to the desk
Installs as a desk clamp or through a grommet hole, with a pre-sorted hardware pack and manual in the box.
Built-in cable management
Integrated cable management keeps power and video cords gathered behind the screen instead of dangling loose.
What's in the box
Documentation
Reviews
No reviews yet.
Complete your setup
QualGear Smart Standing Desk Frame, Dual Motor Electric, Tabletop Not Included, QG-NE01
- Height range 25-50 in / 63.5-127 cm
- Width range 42-68 in / 106.7-172.7 cm
- Type Smart standing desk frame, dual motor
Star Ergonomics 3-Stage Dual Motor Electric Sit-Stand Desk Frame, White, Tabletop Not Included, SE07E1FW
- Height range 24.4-50.4 in / 620-1280 mm
- Width (frame) 39.4-66.9 in / 1000-1700 mm
- Depth (frame) 23.6 in / 600 mm
Star Ergonomics 3-Stage Reverse Dual Motor Electric Sit-Stand Desk Frame, Black, Tabletop Not Included, SE06E1FB
- Height range 24.4-50.4 in / 620-1280 mm
- Width (frame) 39.4-66.9 in / 1000-1700 mm
- Depth (frame) 23.6 in / 600 mm
Compare other options
QualGear Articulating Monitor Desk Mount with Spring Arm, 13-32 In, Silver, QG-DM-01-023
- Monitors supported 1
- Load capacity 19.8 lb / 9 kg
- Screen size range 13-32 in / 33-81 cm (guide; fit is set by VESA pattern and weight)
QualGear 3-Way Articulating Dual Monitor Desk Mount, 13-32 In, Silver, QG-DM-02-016
- Monitors supported 2
- Load capacity 17.6 lb / 8 kg per arm
- Screen size range 13-32 in / 33-81 cm per monitor (guide; fit is set by VESA pattern and weight)